- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Buying Amrad Capacitors on Amazon
Posted on 11/4/24 at 12:23 pm
Posted on 11/4/24 at 12:23 pm
Had my fall maintenance visit and the tech said my two furnace blower capacitors had a low reading. One is a 25 mf, the other a 5 mf.
I was quoted $225 each for replacement (part and labor) which seems absurd. I thought I might buy two new capacitors and then call around to see if one of the local HVACs will quote me straight labor... it shouldn't take more than an hour.
Has anyone purchased Amrad capacitors off of Amazon? I immediately think about knock-offs and Chinese crap, but was curious if others have gotten them there and been happy with the product.
I was quoted $225 each for replacement (part and labor) which seems absurd. I thought I might buy two new capacitors and then call around to see if one of the local HVACs will quote me straight labor... it shouldn't take more than an hour.
Has anyone purchased Amrad capacitors off of Amazon? I immediately think about knock-offs and Chinese crap, but was curious if others have gotten them there and been happy with the product.
Posted on 11/4/24 at 12:32 pm to SM6
quote:wait till you are quote $225/hr for labor
I was quoted $225 each for replacement (part and labor) which seems absurd. I thought I might buy two new capacitors and then call around to see if one of the local HVACs will quote me straight labor... it shouldn't take more than an hour.
Posted on 11/4/24 at 12:33 pm to SM6
Amrad is an American made capacitor. Buy them and replace them yourself.
Posted on 11/4/24 at 12:59 pm to SM6
I need to change one in my attic unit. I was just gonna do it myself. Was also quoted $225 or so. I've done one on the outside unit before and there was nothing to it.
Posted on 11/4/24 at 1:10 pm to SM6
You can probably change it yourself by watching a couple youtube vids.
As far as I know, the chinese havent started duplicating Amrads caps and selling them as original on amazon. If Amrads continue gaining in popularity then its likely they will try and copy them. You can also try ordering them from SupplyHouse if they have them.
As far as I know, the chinese havent started duplicating Amrads caps and selling them as original on amazon. If Amrads continue gaining in popularity then its likely they will try and copy them. You can also try ordering them from SupplyHouse if they have them.
Posted on 11/4/24 at 1:12 pm to SM6
I have. As long as you know the capacitance value(s), it's easy.
Posted on 11/4/24 at 1:26 pm to SM6
$225 each is ridiculous. They are $20 each, and the HVAC companies usually mark those up to around $70-80 each plus labor. So I'm guessing $120 labor plus $150 for the parts, around $250-300 total is the cheapest you'll find anyone to do it.
Or buy them yourself and replace your self in 20 mins for around $50 total.
Or buy them yourself and replace your self in 20 mins for around $50 total.
Posted on 11/4/24 at 1:37 pm to Trout Bandit
quote:
Amrad is an American made capacitor. Buy them and replace them yourself.
Yep that is the game plan, just looking for the best place to purchase an Amrad.
Posted on 11/4/24 at 2:08 pm to SM6
quote:
Has anyone purchased Amrad capacitors off of Amazon?
Yes, I buy them off Amazon and they are OEM.
Posted on 11/4/24 at 3:53 pm to SM6
My AC guy charges me $125 which includes parts and labor.
Posted on 11/4/24 at 6:54 pm to SM6
I’m interested to know how the tech would know they’re “a little low” without continuously monitoring them over their lifespan. They have a pretty wide tolerance and are wound tight to where they aren’t losing much capacitance without swelling or a catastrophic failure.
Posted on 11/4/24 at 7:23 pm to SM6
A guy in my neighborhood recommended the titan capacitors. He is a maintenance guy for apartments. The capacitors are easy to replace. Just get the specs off the old ones with a pic and buy the replacement. When they start to go bad they can be misshapen or leak a clear fluid. I’ve replaced the ones you mention and one on the outdoor condenser as well. Just make sure you pull the breaker before starting work
Posted on 11/4/24 at 10:01 pm to TigerB8
quote:
A guy in my neighborhood recommended the titan capacitors.
Titan HD capacitors, the HD's are USA-made. I have a spare for each condenser and a spare for a blower motor. I replaced one for the downstairs blower several months ago, took about 30 minutes and only that long because the furnace exhaust duct was routed right in the way. My blowers are only single 10MFD, cost less than $9 for the capacitor from the local mechanical supply.
This post was edited on 11/4/24 at 10:02 pm
Posted on 11/4/24 at 10:21 pm to Dallaswho
quote:
I’m interested to know how the tech would know they’re “a little low” without continuously monitoring them over their lifespan. They have a pretty wide tolerance and are wound tight to where they aren’t losing much capacitance without swelling or a catastrophic failure.
They can measure two different ways for the capacitor directly and can also look at in-rush and running amperage against the nameplate ratings as well as measure back EMF, newer capacitors might say +- 5% but in reality they will be well within 1% (one of my 45/4 Titans measured 44.97/5.02). Capacitors can start to go bad long before you see any physical signs too, that's the problem by simply going by eye test because a bad capacitor, even if only by a few %, can cause damage to fan and compressor motor windings if left long enough. I check mine at the start and end of each season, if they aren't within 5% then I replace them. Far cheaper than a new compressor or fan motor, and far less bitching from the woman over a hot house.
Posted on 11/5/24 at 10:12 am to Clames
quote:
Titan HD capacitors, the HD's are USA-made
I've only seen the regular ones in the yellow box.
Didn't know there were heavy duty versions....and they are made in Kennesaw, GA right up the road from me!
Posted on 11/5/24 at 10:37 am to Clames
quote:
They can measure two different ways for the capacitor directly and can also look at in-rush and running amperage against the nameplate ratings as well as measure back EMF, newer capacitors might say +- 5% but in reality they will be well within 1% (one of my 45/4 Titans measured 44.97/5.02). Capacitors can start to go bad long before you see any physical signs too, that's the problem by simply going by eye test because a bad capacitor, even if only by a few %, can cause damage to fan and compressor motor windings if left long enough. I check mine at the start and end of each season, if they aren't within 5% then I replace them. Far cheaper than a new compressor or fan motor, and far less bitching from the woman over a hot house.
You honestly think an HVAC tech is checking that? I have my doubts, especially someone that wants to charge $450 to change 2 out when if he was there already checking them would have been able to do it in 3 mins.
I know its probably a huge upsell, but why charge so much most would refuse? If he would have offered it for like $100-150 total because he was already checking them it would be a slam dunk upsell.
Posted on 11/5/24 at 11:52 am to baldona
quote:
You honestly think an HVAC tech is checking that?
Mine does, I certainly do for my own edification but it's a pretty simple process that pretty much anyone who is reasonably handy and comfortable around electricity can do. Here's a diagram for checking capacitors in-use which is probably the most accurate method as well as the only method if the capacitor is difficult to access directly.
quote:
I know its probably a huge upsell, but why charge so much most would refuse?
Because many don't refuse, people expect HVAC repair to cost a lot more these days than it used to. I have a pretty good HVAC tech that I use for annual service and cleaning that I pay cash to, but I still do as much as my own work as I can. I just had one unit replaced and the remaining 2-ton Trane was built in 1996.
This post was edited on 11/5/24 at 11:58 am
Posted on 11/5/24 at 10:47 pm to SM6
Bought my Amrad cap on Ebay from a dealer in Florida. Dealer had many sizes and cap was delivered in a couple of days.
Posted on 11/6/24 at 8:11 am to OYB
I just purchased two off of Amazon. We’ll see how legit they look when they arrive but after a few YouTube videos I feel good about installation on my own.
Posted on 11/6/24 at 11:33 am to SM6
I bought mine on Amazon. The retailer was Amrad.
Popular
Back to top


11





