- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Design/Architect in BR
Posted on 5/5/14 at 10:07 pm to TigerSaint1
Posted on 5/5/14 at 10:07 pm to TigerSaint1
you may be just as well off with a design build contractor
An architect will charge you a significant fee for a full set of plans
An architect will charge you a significant fee for a full set of plans
Posted on 5/5/14 at 10:47 pm to VetteGuy
Well one of them has been doing dwg for 30 years. He use to work with an arch and his son works for him full time now. Hes in demand and has a great rep. The 150 houses he draws a year dont have a problem with him.
Posted on 5/6/14 at 8:53 am to CHEDBALLZ
Architects will charge 45-55 cents a foot. Additional changes will be charged by the hour, usually a few hundred bucks when I alter the house to fit a lot and make a few changes to the interior. Post tension should run you about $1.15 a sqft of your slab. That includes installation of cables, cable stress, and engineering/stamp.
Posted on 5/6/14 at 8:58 am to B&TCoonhound
Yeah, I'm not sure if people understand the engineering work on the post-tension slab.
They'll do it without, but no warranty.
They'll do it without, but no warranty.
Posted on 5/6/14 at 9:02 am to VetteGuy
I use Coast Concrete Services in BR. I believe that have an in house engineer that does all the cable layouts. It's included in the price, so you don't have to outsource the engineering.
Posted on 5/6/14 at 9:04 am to VetteGuy
quote:
They'll do it without, but no warranty.
I think if you bring in more than 12" of fill for the slab that you have to let it sit for so long and have at least 96% compaction before they will warranty it.
Posted on 5/6/14 at 9:33 am to B&TCoonhound
quote:
Coast Concrete Services
Makes sense that its included in the price.
On ours, the slab stamp was from the architect's engineer.
Posted on 12/8/16 at 2:59 pm to CHEDBALLZ
quote:
I work with 3 guys who do house plans on the side. They all charge .55 a square foot and $250 to get an engineers stamp. If you have a floor plan in mind they can do it for you. They also have binders with tons of floor plans of every house theyve ever drawn.
CHEDBALLZ or anyone else, I am looking to get a 30 x 40 workshop drawn. I live in a subdivision and I have some rules to abide by so I need someone to help with the design. Can you send your guys contact info to lsutix4u@gmail.com?
Thanks!
Posted on 12/8/16 at 3:08 pm to TigerSaint1
if you are looking for a custom architect in BR, look up Mark Matthews
Posted on 12/8/16 at 5:47 pm to TigerSaint1
My buddy that builds houses told me to look into this drafting (specifically houses), his guy is beyond backed up and is having to pass work on to another local guy.
There are no schools around here with direct CAD programs. I have no experience. Might be a pipe dream, just wanted to entertain the suggestion.
Anyone with info please email me at polar pop td at gmail
There are no schools around here with direct CAD programs. I have no experience. Might be a pipe dream, just wanted to entertain the suggestion.
Anyone with info please email me at polar pop td at gmail
Posted on 12/8/16 at 7:10 pm to Polar Pop
you can learn revit in a month or so with lots of practice
well enough to do concept drawings anyway
CAD takes longer
I draft our concept design drawings in revit then convert them to cad and send to a real draftsman to detail them
well enough to do concept drawings anyway
CAD takes longer
I draft our concept design drawings in revit then convert them to cad and send to a real draftsman to detail them
Posted on 12/8/16 at 8:05 pm to Firemedic87
Madden may have a good price but he is hard to work with. He drew the plans for a house we built in 2008. I thought he was kinda quirky because he against any minor changes my wife wanted to make. He eventually did but it was like pulling teeth.
We built our current house in 2013 and my wife called just to see if he had anything close already drawn. We wanted a 2 story farmhouse with raised porches. He was very short and said he hated drawing that style of house. She said her goodbyes and we found someone else.
We built our current house in 2013 and my wife called just to see if he had anything close already drawn. We wanted a 2 story farmhouse with raised porches. He was very short and said he hated drawing that style of house. She said her goodbyes and we found someone else.
This post was edited on 12/8/16 at 8:13 pm
Posted on 12/8/16 at 8:18 pm to pdubya76
We just had madden do ours and it was a terrible experience. Luckily my builder is a friend and handled it. He does all the plans for him so we thought he would help him out faster..wrong. He lied and kept making promises he never kept. 2 months later we have a set of plans and are finally starting Monday!
I took his cloverdale plan and modified it on cad and sent him the PDF of it. I had minor changes, made it a tad bigger and it took forever. Oh well it's all over with now and we are happy with it but from what I gathered everyone has the same experience with him.
I took his cloverdale plan and modified it on cad and sent him the PDF of it. I had minor changes, made it a tad bigger and it took forever. Oh well it's all over with now and we are happy with it but from what I gathered everyone has the same experience with him.
Posted on 12/8/16 at 8:34 pm to VetteGuy
quote:
Did your price include the slab engineering?
If it's a standard stick build home with a slab on grade... you don't need the foundation plan stamped. It just has to meet the minimum requirements.
Posted on 12/9/16 at 8:42 am to VetteGuy
quote:
Get a damn good framer, no matter which way you go.
That is the one place I feel the best with "overpaying". Do not go off price with the framer, go off quality of work, recommendation, and feel for the person doing the work. A quality framer will help you with schedule, other subs they "prefer" working around, and they most literally set the entire foundation for all the remaining work (other than actual foundation). Any mistake or lack of quality by a framer will only be compounded through the rest of the process and is very hard to correct or conceal.
Posted on 12/9/16 at 8:46 am to Tigerpaw123
quote:
Mark Matthews
Legit guy right there. Very knowledgeable about multiple styles from homes to elevated camps, very nice, and extremely helpful.
Posted on 12/9/16 at 8:50 am to drsung
Damn that was a hell of a thread bump...
Posted on 12/9/16 at 9:16 am to VetteGuy
I used to do engineer on PT slabs
It's not rocket science, maybe 2-4k (design and stamped plans) for a 3000 sf home
It's not rocket science, maybe 2-4k (design and stamped plans) for a 3000 sf home
Posted on 12/9/16 at 9:17 am to wickowick
quote:
is much closer to a draftsman. Architects are much more and really aren't need for most residential homes...
This
Popular
Back to top
Follow TigerDroppings for LSU Football News