Started By
Message

re: Maid knocked power supply loose in Gaming PC- Update Pg2

Posted on 6/12/25 at 7:40 pm to
Posted by Joshjrn
Baton Rouge
Member since Dec 2008
31632 posts
Posted on 6/12/25 at 7:40 pm to
I assume boot# 7 is your actual drive? What is that? An NVME drive? A spinning disk drive?

Eta: Maybe this? LINK
This post was edited on 6/12/25 at 7:42 pm
Posted by deeprig9
Unincorporated Ozora
Member since Sep 2012
73142 posts
Posted on 6/12/25 at 7:57 pm to
ST3500414CS
Posted by OU812ME2
Earth
Member since Jun 2021
1334 posts
Posted on 6/12/25 at 8:59 pm to
Probably. It's easy if you get it. But I understand not wanting to screw with it. It's just money
Posted by Joshjrn
Baton Rouge
Member since Dec 2008
31632 posts
Posted on 6/12/25 at 9:58 pm to
quote:

ST3500414CS

So spinning rust. If I’m throwing a dart, a jolt to the chassis either knocked a connector loose (either between the psu and the drive or the drive and the motherboard) or the drive has failed, either randomly or, again, due to physical shock.

If you’re making it into bios/uefi, that means your other components are functioning at least at a base level.
Posted by deeprig9
Unincorporated Ozora
Member since Sep 2012
73142 posts
Posted on 6/12/25 at 10:06 pm to
I went ahead and cracked it open, that 500gb drive doesn't seem to be doing a damn thing. The connectors to it are all very well seated. Taking it to geek squad Saturday morning in Athens. I know how to hot swap hard drives from the front of a server in a data center but once tools have to come out, I'll pay someone who has done it a thousand times. It's also dusty as a motherfricker in there, maybe they'll give it a blow job.
Posted by Joshjrn
Baton Rouge
Member since Dec 2008
31632 posts
Posted on 6/12/25 at 10:10 pm to
quote:

I went ahead and cracked it open, that 500gb drive doesn't seem to be doing a damn thing. The connectors to it are all very well seated. Taking it to geek squad Saturday morning in Athens. I know how to hot swap hard drives from the front of a server in a data center but once tools have to come out, I'll pay someone who has done it a thousand times. It's also dusty as a motherfricker in there, maybe they'll give it a blow job.

What’s the exact sku of the motherboard? Unless you pay for a service membership, I’d rather you pay for a new drive than for some kid to tell you your drive is dead.

And I very much doubt they are going to really dust the pc. That’s a very messy, very outside, job
Posted by notsince98
KC, MO
Member since Oct 2012
21368 posts
Posted on 6/13/25 at 8:03 am to
you can get new drives for $50 or less. Is the hope just for data recovery?
Posted by FreddieMac
Baton Rouge
Member since Jun 2010
24838 posts
Posted on 6/13/25 at 4:01 pm to
quote:

I went ahead and cracked it open, that 500gb drive doesn't seem to be doing a damn thing.


If you do not hear it or feel it spinning, then its dead. More than likely a stuck seek arm. I have done this before and it work. Slap it with your hand on the top; sometimes a bit of percussive maintenance will free the joint. But if it does spin up, copy every off it before shutting down the computer.
Posted by ATLTiger
#TreyBiletnikoffs
Member since Sep 2003
46093 posts
Posted on 6/14/25 at 6:25 am to
quote:

Maid


Pics?
Posted by deeprig9
Unincorporated Ozora
Member since Sep 2012
73142 posts
Posted on 6/14/25 at 4:44 pm to
Update-

A family member who knows this stuff and actually built this box for himself before upgrading and giving it to my son was kind enough to drive an hour to my house today and troubleshoot. Yes, the drive shat the bed. But a new drive was installed, windows loaded, and after a million updates, it's working normally. But during the process, the "good" drive shite the bed, and bios and windows can find it anymore, so he took it back home with him to continue troubleshooting. The initial drive that went bad was OS and some other shite, but the big drive is where my kid has all his actual media, projects, recordings, movies, and graphic design work. Whether he gets this all up and running again and recoverable notwithstanding, I'm now looking for an at home NAS RAID1. Is there a tech board consensus on a good one out of the box? Seeking minimum of 1TB in a RAID1 configuration. I know enough about RAIDs to know what they are and how they work at a high level, and that's it.
Posted by Joshjrn
Baton Rouge
Member since Dec 2008
31632 posts
Posted on 6/15/25 at 8:36 am to
In an era of blazing vast internet speeds, are you sure you want to go RAID1 instead of just using cloud backup?
Posted by Chromdome35
Fast lane, behind a slow driver
Member since Nov 2010
7934 posts
Posted on 6/15/25 at 9:15 am to
I use both but I have a Raid 5 NAS.
Posted by LemmyLives
Texas
Member since Mar 2019
13422 posts
Posted on 6/15/25 at 9:59 am to
I would not recommend building a RAID using the motherboard controller. I did that for years and regretted it about every two years. I have two Synology five bay units, as well as a synology router. The DSM software is very pretty and easy to use. Beware that if you buy one of the most recent (last 90 days) models, they apparently try to force you to buy synology drives to receive support.
Posted by Joshjrn
Baton Rouge
Member since Dec 2008
31632 posts
Posted on 6/15/25 at 11:17 am to
quote:

I use both but I have a Raid 5 NAS.

And you likely have a use for it, but the average home user is rarely, if ever, going to have a use for speeds beyond what a decent NVME drive can provide.
Posted by Dallaswho
Texas
Member since Dec 2023
3403 posts
Posted on 6/15/25 at 11:50 am to
quote:

I'm now looking for an at home NAS RAID1. Is there a tech board consensus on a good one out of the box? Seeking minimum of 1TB in a RAID1 configuration


In the era of Copilot, there is no need to get a fancy branded NAS system anymore. Just get an old $40-$50 mini PC on eBay and a couple $50 1TB SATA SSDs and have Copilot walk you through installing OMV(easy) or TrueNAS(less easy) operating system. I’d just make sure the processor supports AES instructions which most all within the last ten years will. Intel quicksync is a bonus if you ever decide to make it a media server one day.
Posted by skrayper
21-0 Asterisk Drive
Member since Nov 2012
34399 posts
Posted on 6/20/25 at 8:48 pm to
If you can afford a maid, you can afford to take it to a shop
Posted by KCRoyalBlue
Member since Nov 2020
1903 posts
Posted on 6/21/25 at 5:59 pm to
I would hope, for all this trouble, that you're at least banging the maid.

It's only fair. And if you are, you should just tell the wife. I'm sure she'd fire her then.

Modern problems sometimes require old-age solutions. You're welcome.
Posted by Kingpenm3
Xanadu
Member since Aug 2011
9775 posts
Posted on 6/24/25 at 2:03 pm to
Years ago the thing to try with a stuck spinning HD was to put it in the freezer for a few hours. I guess it was the bag of rice of its day!

first pageprev pagePage 2 of 2Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram