Page 1
Page 1
Started By
Message

Idiot garage door

Posted on 11/17/26 at 8:00 am
Posted by 10tiger
Member since Jan 2021
316 posts
Posted on 11/17/26 at 8:00 am
4 year old home with insulated garage door and genie motor. The thing has been an enormous unpredictable PITA since we moved in. Will go 6 months fine then will have a period of time where it takes 5 times to close it. Nothing in the way. Installer comes out, it closes fine and he leaves. About 9 months ago, after so many complaints and it sounding like metal grinding and shaking half way down he changed out the rollers to the correct rollers and adjusted the spring which significantly helps and I thought we were in the clear until this week. Why it took 3 years to realize they were not the appropriate rollers is beyond me. Now it’s Back to it making it 90% of the way down and back up x 3-5 times before closing. The lasers are lined up, there is no obstruction, and it doesn’t appear to be hitting resistance like it was before. Is there anything else to troubleshoot? I know it’s a heavy door. What am I missing here? Such a first world problem but boy is it annoying.
Posted by jdavid1
Member since Jan 2014
2708 posts
Posted on 11/17/26 at 8:23 am to
I would call a different company and see if they have a different solution.
Posted by TU Rob
Birmingham
Member since Nov 2008
13691 posts
Posted on 11/17/26 at 8:55 am to
What are the temps like where you live now? Mine will occasionally do this early in the morning if its in the 40s like it has been for about a week now. Cleaning the tracks and lubricating usually helps. Hit the rollers and the springs is what our guy told me. I'm honestly not sure what lubricating the springs does, but I spray them when they are all stretched out.

He also installed some sort of flip bracket at the top of mine. Similar to this video.




ETA: Also check the gears inside your motor. I had an old one that got stripped out and had to replace the motor. They were plastic and had been worn down.
This post was edited on 11/17/26 at 8:57 am
Posted by 10tiger
Member since Jan 2021
316 posts
Posted on 11/17/26 at 9:04 am to
Thank you for the tip. Weather could def be a possibility. Going to ask about that piece too.
Posted by MikeBRLA
Baton Rouge
Member since Jun 2005
17323 posts
Posted on 11/17/26 at 9:12 am to
Does this only happen on sunny days? If so it could be that you have direct sunlight hitting the laser's receiver.

I had this happen on my old house and it had me scratching my head forever until I realized the sun was the issue. Built a makeshift sun-shade for it... problem solved.
Posted by 10tiger
Member since Jan 2021
316 posts
Posted on 11/17/26 at 9:22 am to
Unfortunately doesn’t discriminate. Day or night whenever least convenient lol
Posted by LemmyLives
Texas
Member since Mar 2019
18434 posts
Posted on 11/17/26 at 9:51 am to
quote:

Does this only happen on sunny days? If so it could be that you have direct sunlight hitting the laser's receiver.

My scenario was that I had a large amount of concrete (porte cochere, with additional concrete going around the porte cochere, leading to a 2 car garage with the sensor problem.) This resulted in the reflected sunlight messing with optical sensors (mostly door keypads and cameras, but occasionally the garage sensors.)
Posted by bbvdd
Memphis, TN
Member since Jun 2009
29292 posts
Posted on 11/17/26 at 10:35 am to
Have you manually lifted and dropped the door to see if there are hangups on the door that make it think it’s hitting something? Maybe check the force adjustment on the door and make sure it isn’t too light.

Also spray the springs and rollers with oil that’s made for garage door springs.
Posted by CatfishJohn
Member since Jun 2020
24228 posts
Posted on 11/17/26 at 1:30 pm to
My garage door sensors are super sensitive to sunlight during certain times of the year where the sunrise is aiming right at them. It's fricking annoying. They'll go down but then think something is in the way and go back up. I put my garbage can in front of the sensor in the light to create a shadow and it goes down.

Posted by CatfishJohn
Member since Jun 2020
24228 posts
Posted on 11/17/26 at 1:32 pm to
quote:

Does this only happen on sunny days? If so it could be that you have direct sunlight hitting the laser's receiver.

I had this happen on my old house and it had me scratching my head forever until I realized the sun was the issue. Built a makeshift sun-shade for it... problem solved.


Sorry didn't see this post or the response before making my post. Disregard.

And to this poster, sunshade doesn't fix mine for whatever reason. I need to create a large shadow. The tech has no clue what to do besides replacing the sensors and all wiring (get more juice) and trying that. Maybe one day it'll beat me down enough to try that.
This post was edited on 11/17/26 at 1:33 pm
Posted by Towelie
America's Wang
Member since Aug 2007
19389 posts
Posted on 11/17/26 at 2:34 pm to
quote:

Is there anything else to troubleshoot?


Those lasers do go bad. I had a new construction that started doing something similar after a few months. After coming out a few times they changed the sensors and no more problems.
Posted by GeauxLSUBengalTigers
Member since Sep 2016
969 posts
Posted on 11/17/26 at 2:59 pm to
It's not heavy at all. Just several thin aluminum panels on rollers.

The springs make it seem heavy.
Posted by RC
Member since Apr 2009
1023 posts
Posted on 11/17/26 at 7:56 pm to
You might want to check the wire connections. On my house they ran really thin gauge wire from the opener to the sensors and they would get a bad connection. The vibrations as the door was closing would break the connection and trip the sensor. I had to strip the wire further and redo the connection
Posted by Twenty 49
Shreveport
Member since Jun 2014
21712 posts
Posted on 11/18/26 at 5:13 am to
quote:

Mine will occasionally do this early in the morning if its in the 40s like it has been for about a week now.


This happened to me last year when it got cold. Door had worked fine for years, but suddenly would close 90% then reverse.

I checked the laser sensors, lubed the rollers, etc. In the end, it took adjusting the force limit setting to make it work consistently. Just turned it a hair at a time until it was good.
Posted by WestSideTiger
Baton Rouge
Member since Jan 2004
5676 posts
Posted on 11/18/26 at 10:52 am to
Your garage door should have an app that goes with it. It will usually give the reason and possibly an error code.

Posted by Spankum
The Sip
Member since Jan 2007
64181 posts
Posted on 11/18/26 at 4:24 pm to
That is irritating as hell.

A while back mine was doing the same thing. After dealing with it foe]r a couple of weeks, I fugured out that half way through the closing, the track was moving causing the laser to get unailgned. It was perfectly aligned in the open position and the closed position. However half way through the closing it was flexing enough to get unaligned
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

Facebook•X•Instagram