- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Table saw
Posted on 2/7/18 at 10:03 am
Posted on 2/7/18 at 10:03 am
Alright ya'll helped me with my purchase of the dewalt planer, now I need help on a table saw. My brother-in-law wouldn't mind selling me his dewalt job site table saw with the rolling stand. Also looking at this one Rigid Tablesaw
We haven't talked about price for the dewalt but it would be cheaper than that rigid. I wouldn't mind paying extra if that rigid table saw is better. I'm just a hobbyist thats been slowly been getting into wood working. So I play around on the weekends. I guess what I'm asking is am I really gaining anything by that rigid table saw? Both have similar rip capacity. Portability doesn't matter to me as well. Looking to mainly use it for ripping and dado blades
We haven't talked about price for the dewalt but it would be cheaper than that rigid. I wouldn't mind paying extra if that rigid table saw is better. I'm just a hobbyist thats been slowly been getting into wood working. So I play around on the weekends. I guess what I'm asking is am I really gaining anything by that rigid table saw? Both have similar rip capacity. Portability doesn't matter to me as well. Looking to mainly use it for ripping and dado blades
This post was edited on 2/7/18 at 10:05 am
Posted on 2/7/18 at 10:07 am to LSUfreak1459
I have done a ton of research on this and ended up getting this. LINK even though they saw Delta isnt what it used to be they still run the table saw market. There is plenty of threads on wood working forums praising this saw. I put a forest woodworker 2 on there and it sure is one clean cut.
If i was woodworking every day i would get you a stop saw.
If i was woodworking every day i would get you a stop saw.
This post was edited on 2/7/18 at 10:09 am
Posted on 2/7/18 at 10:12 am to CarRamrod
Thanks. I didn't know delta had one in that price range. I'll look into it.
Posted on 2/7/18 at 10:14 am to LSUfreak1459
quote:
We haven't talked about price for the dewalt but it would be cheaper than that rigid. I wouldn't mind paying extra if that rigid table saw is better.
If you're using a contractor style saw that you either work on the ground or on your own table, I would go with the cheaper option. The only substantive differences will be things like the adjustment levers - they're all going to have cheapy plastic parts that will break - that's the reality of the market - and once you're used to the way Dewalt does things (you're happy with the planer), then you'll have more comfort with the controls and so forth of their other products (ditto for Rigid or Makita, etc.).
However, if you're "truly" getting into the hobby and have the space - long-term you're going to want a true 220v cabinet saw. The more you use it, the more you're love it - but let me tell you, brother, those things aren't cheap - even good ones 20 and 30 years old ain't cheap - so just get ready for that.
Posted on 2/7/18 at 10:14 am to CarRamrod
The ridgid and delta both look like nice saws...i just ended up going with a smaller porter cable due to space limitations. but i really wanted one of those two
Posted on 2/7/18 at 10:15 am to CarRamrod
quote:
even though they saw Delta isnt what it used to be they still run the table saw market.
Delta and Jet were the absolute shite back in the day. Some Delta models APPRECIATED as they aged.
Think about that - a power tool.
Posted on 2/7/18 at 10:21 am to Ace Midnight
quote:
However, if you're "truly" getting into the hobby and have the space - long-term you're going to want a true 220v cabinet saw.
Space isn't an issue. I would one day like a cabinet saw but don't want to drop that kind of money at this point. I got into it about a year ago and I enjoy it but I've gotten along this whole time without a table saw. So I don't think I need to get the best of the best just yet. Eventually, if I keep at it, I'll start upgrading equipment but at the moment I'm just trying to get into the game.
Posted on 2/7/18 at 10:30 am to LSUfreak1459
quote:
So I don't think I need to get the best of the best just yet.
I don't disagree with that - but as your hobby grows, there's no reason to buy new if you have a reliable used option that you have now.
And, you can build a whole house with just a skill saw - it's about the saw user as much as the saw.
$400 to $500 on an upmarket table saw is between 1/5 and 1/3 (used, but still) of a cabinet saw - that's all I'm saying.
Posted on 2/7/18 at 10:36 am to Ace Midnight
So basically spend the $250-300 now on the dewalt and later upgrade to a nicer cabinet saw is what your saying? Thats how I'm leaning because I could probably sell the table saw later for what I'm going to pay for it now.
Posted on 2/7/18 at 11:03 am to LSUfreak1459
If you're going to get one of contractor (i.e. non cabinet) style table saws, I'd highly recommend getting something similar to the Kreg RipCut or another tracksaw attachment. It allows you to use your skilsaw to breakdown full sheets of plywood where those contractor saws really aren't made to be stable to handle that.
Just my .02
Just my .02
Posted on 2/7/18 at 11:34 am to LSUfreak1459
I have several smaller Rigid power tools but I've never used one of their table saws. Up until a few months ago I had been completely satisfied with every Rigid tool I had ever tried until I bought a 12" Rigid sliding miter saw. Couldn't get a square cut or accurate bevel out of that thing to save my life. I adjusted the fences, tried out different blades, and even tried to compensate by over and under valuing my angles and bevels. I packed it back up and returned it to HD.
I have a Kobalt tablesaw that suits me fine for now. If I ever get to the point where I need to break down larger material I'd probably go with a Delta.
I have a Kobalt tablesaw that suits me fine for now. If I ever get to the point where I need to break down larger material I'd probably go with a Delta.
Posted on 2/7/18 at 11:39 am to LSUfreak1459
Avoid the portable type saw. Get a good contractor type saw with the legs.
Get something with the big heavy cast iron top. with extensions. A wide top is very useful for ripping plywood.
See if the motor can run on either 120 or 220v. That way you have options down the road.
Get the nicest fence you can afford.
I have an old Delta that came with a 30somthing inch top. Biesemyer fence with a 120/220v motor. I have moved sever times and use 220v whenever it's available.
It's the shitz.
I think a cabinet saw is overkill in a home shop.
Get something with the big heavy cast iron top. with extensions. A wide top is very useful for ripping plywood.
See if the motor can run on either 120 or 220v. That way you have options down the road.
Get the nicest fence you can afford.
I have an old Delta that came with a 30somthing inch top. Biesemyer fence with a 120/220v motor. I have moved sever times and use 220v whenever it's available.
It's the shitz.
I think a cabinet saw is overkill in a home shop.
Posted on 2/7/18 at 11:43 am to LSUfreak1459
That Ridgid is a great saw.
This post was edited on 2/7/18 at 1:15 pm
Posted on 2/7/18 at 11:43 am to King George
Thats disappointing to hear. The rigid tools I have used have all been good. I have a Ryobi 10" sliding miter saw. Put a diablo blade and it cuts square. I move it around a lot so I've been impressed. My bro-in-law also wants me to buy his 12" Milwaukee sliding mitersaw but I'm holding out for the bosch when I'm ready to upgrade so I can have it flush against a wall.
Posted on 2/7/18 at 11:54 am to LSUfreak1459
I have the Delta 36-725 from Lowes. I used it for maybe 3 small projects probably a total of 6 hours run time. I was cutting 3/4" plywood and smoked the motor. I live south of BR and the 2 closest place to do warrenty was in Jackson Ms and Lake Charles. 3 hrs each way. I decided to bring it to Jackson. It took 3 months for them to get the a motor and the trunion. After Delta shipped the parts to my house I had to turn around and ship it to Mays & Company to do the repairs. I haven't used it since I got it back in October so I don't know what to expect. Wish I never would have bought it. Hope this helps.
Posted on 2/7/18 at 11:55 am to LSUfreak1459
quote:And I was happy with every Rigid tool I had used before that saw. I own a Rigid circular saw, sanders, 10" miter saw, and a shop vac. Honestly, I was a surprised. I thought maybe I just had a defective saw but there were just too many issues. I couldn't keep the movable fences square and the mechanism that locks the saw in place at preset bevels struggles to hold the heavy motor when it's all the way to 45°. It let's the whole thing go an extra degree or two.
The rigid tools I have used have all been good.
Posted on 2/7/18 at 11:58 am to LSUfreak1459
I have a very nice old Delta Unisaw. It's a 220v. I've been in my house now for 9 years. I haven't used it in that time and really haven't missed it that much. There are times that it would be nice for a glue up or breaking down plywood, but I've found other ways to accomplish another way.
I use my miter saw and band saw all the time.
I use my miter saw and band saw all the time.
Posted on 2/7/18 at 12:23 pm to LSUfreak1459
quote:
So basically spend the $250-300 now on the dewalt and later upgrade to a nicer cabinet saw is what your saying?
That's what I would do.
Posted on 2/7/18 at 12:35 pm to Ace Midnight
make sure the fence can rip +/- 30" on the right side. All of the smaller ones that can only rip 10-12" seem useless to me.
Posted on 2/7/18 at 12:36 pm to LSUfreak1459
DeWalt jobsite saw. I have one and the adjustment system is far above the others in its class. It's also very good in terms of being able to true everything up to get the best accuracy, I've ripped strips of Jaktoba for flooring and it was within 0.003" tolerance from end to end. There's also a lot of aftermarket support for these saws and lots of plans out there if you wanted to build a cabinet for the saw. Good blades are also important, the DeWalt construction blades are good for general purpose work but you'll want to get a good ripping blade if you plan on doing any small cabinetry/furniture projects.
Popular
Back to top
Follow TigerDroppings for LSU Football News