- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
What should I expect to pay for a new 3-ton AC unit
Posted on 5/21/17 at 7:02 pm
Posted on 5/21/17 at 7:02 pm
It's a 1200 SQ ft shot gun in Mid-City. Contractor says I need a 3-ton unit outside with a 1-ton "return" in the inside.
What should I expect to pay.
TIA
What should I expect to pay.
TIA
Posted on 5/21/17 at 7:13 pm to Volt
You may get more responses posting in O-T Lounge.
I have no idea what a 1 ton return is.
I have no idea what a 1 ton return is.
Posted on 5/21/17 at 7:23 pm to Volt
I'm in the the business and have no idea what you mean by 1 ton return
Prices can vary a lot with equipment and seer rating but I'll give it a shot.
Low end made in China crap that will give you problems in 4 years = $4000
High end high efficiency trane equipment that will get you a easy 15 years may be over $10,000
Prices can vary a lot with equipment and seer rating but I'll give it a shot.
Low end made in China crap that will give you problems in 4 years = $4000
High end high efficiency trane equipment that will get you a easy 15 years may be over $10,000
Posted on 5/21/17 at 7:23 pm to Volt
I had to replace the system in my vacation house which is 1000 sq ft, two story. It was $4500. I think it was as 3 ton system. The Seer rating is important.
Posted on 5/21/17 at 7:47 pm to Volt
Around $1400/ton for a good system inside and outside tonnage should match
Posted on 5/21/17 at 8:17 pm to Volt
I really have no idea what a "1-ton return" means...so you should probably check into that.
also, the quality of the installation makes a ton of difference, so chose someone who is going to do a decent job.
gotta also figure out how much work they will have to do in order to come up with what is a fair price. a few things that make a lot of difference:
- is the evaporator unit in the attic or in a closet.
- if in the attic, will the unit fit through the entry?
- will ductwork need replacing?
- is the copper reusable?
I know you don't have the answers to all of these questions, but that is why a firm quote is difficult.
also, the quality of the installation makes a ton of difference, so chose someone who is going to do a decent job.
gotta also figure out how much work they will have to do in order to come up with what is a fair price. a few things that make a lot of difference:
- is the evaporator unit in the attic or in a closet.
- if in the attic, will the unit fit through the entry?
- will ductwork need replacing?
- is the copper reusable?
I know you don't have the answers to all of these questions, but that is why a firm quote is difficult.
Posted on 5/21/17 at 8:33 pm to Volt
quote:
I need a 3-ton unit outside with a 1-ton "return" in the inside
Don't allow whoever told you this to do any work for you. If you have a 3-ton condenser, you should have a 3 ton air handler.
Posted on 5/21/17 at 9:04 pm to Volt
3 ton complete system is going to be $4,500-$5,000 that quality equipment, we install them all the time for that
Posted on 5/21/17 at 9:07 pm to Volt
I know a 3-ton Goodman 14 seer heat pump and air handler is roughly $2000. That is just equipment, not installed.
Posted on 5/21/17 at 9:45 pm to Volt
2.5 ton Rheem packaged unit at the lake house just replaced it. $2700 installed. Reused old ducts.
Posted on 5/24/17 at 8:00 am to Volt
Depending if they can use the same copper lines the labor should be around $1,500-$1,800
A new 3 ton unit with air handler is around 2,500
depending on brand. I just got a new one ( RUDD ) and did 95% of the work myself including running new copper lines.
Anything under $4,500 is about the norm to have it installed.
A new 3 ton unit with air handler is around 2,500
depending on brand. I just got a new one ( RUDD ) and did 95% of the work myself including running new copper lines.
Anything under $4,500 is about the norm to have it installed.
Posted on 5/24/17 at 8:16 am to Volt
I installed 2 2.5 ton replacement units, outside and inside last year, Trane brand for $8600, so probably $4-5K for one.
Posted on 5/25/17 at 6:27 am to Volt
Meajeaux posted up a online place that had some great prices
Posted on 5/25/17 at 2:07 pm to Volt
Just had a 3.5 ton installed, outdoor plus indoor unit and programmable thermostat. Paid $3,700 which included tax.
FYI, Trane XR 14 Seer
FYI, Trane XR 14 Seer
Posted on 5/25/17 at 10:17 pm to Volt
$2700 is what I paid for a RUUD installed. Licensed installer doing side work and a neighborhood hero to many of us.
Popular
Back to top
Follow TigerDroppings for LSU Football News