- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Replacing entire AC system
Posted on 2/2/16 at 7:54 am to PSU2LSU
Posted on 2/2/16 at 7:54 am to PSU2LSU
quote:
Just get the leak fixed and see if that makes it perform better.
From what I understand, there's basically no "fixing" these leaks. You just added freon from time to time, which I've done. It will work good for a few weeks after doing this, but after 6 months or so it's time to add more freon again.
Posted on 2/2/16 at 8:07 am to PhiTiger1764
Call the guy i recommended. He will give you a fair assessment.
Posted on 2/2/16 at 8:12 am to PhiTiger1764
I just had a unit replaced. 2500 sq ft with 2 - 3 ton trane units. Replaced the compressor and coils with trane parts on one unit a few months ago for $4900.
I want to know how you went a few months without turning on the A.C. in south La.
I want to know how you went a few months without turning on the A.C. in south La.
This post was edited on 2/2/16 at 8:13 am
Posted on 2/2/16 at 8:15 am to PhiTiger1764
My guy said 90% of the time it's in the coil and if you replace that you'll be fine.
Posted on 2/2/16 at 8:16 am to PhiTiger1764
12 years isn't really that old for an AC unit.
Posted on 2/2/16 at 8:19 am to Salmon
quote:
well I replaced my 4 ton 2 years ago and that is what it cost, so
I did too and it cost me under 4K. That was heating and cooling. Buddy deal.
Posted on 2/2/16 at 8:22 am to windshieldman
quote:
12 years isn't really that old for an AC unit.
Not really no but the issue is they dont make R22 parts anymore. Or very few parts can still be bought. Everything is converting to R-410.
OP I just replaced my 3 ton unit and upgraded a half ton to 3.5 for 6K in the dead of summer. You can up the tonage a little but dont jump a full ton. You wont cycle the air in your house properly and can end up with mold issues.
Posted on 2/2/16 at 8:24 am to MorbidTheClown
Thanks.. a $100/month lower bill would be incredible. I'd be happy with $50/month.
Posted on 2/2/16 at 8:25 am to fishfighter
quote:
I did too and it cost me under 4K. That was heating and cooling. Buddy dea
yeah ours cost right at $5k with no buddy deal. But. we've saved about $1k already.
Posted on 2/2/16 at 8:26 am to PhiTiger1764
quote:
Thanks.. a $100/month lower bill would be incredible. I'd be happy with $50/month.
Mine dropped a good bit the last couple months it was running. Somewhere in the $45 dollar range a month.
Posted on 2/2/16 at 8:27 am to shawnlsu
quote:
how you went a few months without turning on the A.C. in south La.
it hasn't really got higher than 75ish outside this winter and I have it set at 78 during the day when I'm not home.
Posted on 2/2/16 at 8:27 am to PhiTiger1764
If you are sure you are not going to be in the home but a few more years, I would not put a top of the line system in...you should be able to get a contractor grade system for several thousand dollars depending on whether you need new ductwork, etc. (which I would not expect).
I know first hand how frustrating it is for your ac not to work properly, but don't let that frustration push you into overspending.
as the others say, a 3 ton should be ok for your size house, so get someone to have a good look to see if something else is going on.
I know first hand how frustrating it is for your ac not to work properly, but don't let that frustration push you into overspending.
as the others say, a 3 ton should be ok for your size house, so get someone to have a good look to see if something else is going on.
Posted on 2/2/16 at 8:31 am to PhiTiger1764
(no message)
This post was edited on 3/8/21 at 12:36 pm
Posted on 2/2/16 at 8:36 am to PhiTiger1764
quote:
It's 12 years old and house is 1600 sqft. Looking at maybe upgrading to a 3.5 or 4 ton unit because even after refilling the freon, the unit just doesn't really cool the house down like it should.
I don't know how anyone can tell you what size unit you need without knowing how old your house is, is it on a slab on grade, how is it insulated, how many windows do you have, where are the windows, etc.
There are a lot of variables and just comparing square footages isn't the best way to size AC units.
Your three ton seems small, but it may be the unit is old, and broken. But then as someone pointed out, a unit that is way too big and satisfies the conditions quickly won't work because it won't run long enough to wring the moisture out of the air.
find a dealer who you can trust to run a proper analysis. You might need better insulation, better ductwork (flex is bad), etc.
If you plan on staying put for 5 years or so, invest in better equipment. You will get the extra money back in utility savings.
This post was edited on 2/2/16 at 8:43 am
Posted on 2/2/16 at 8:39 am to Restomod
The minimum standard is 14 seer. With your system being 12 years old, you have a R22 system that will have to be replaced at some point. The price of R22 is going through the roof as the supply has been reduced.
I suggest finding a contractor that will come in your home and give you an air flow analysis to determine tonnage and whether there are any issues with your duct work. The majority of issues that people have are a result of air flow problems and homes not properly insulated. You probably need a 3 or 3.5 ton system. A changeout from old to new should not cost you more than $7k installed.
I also recommend checking into a 2 stage system should you have the extra money. They are work the money and will save you monthly.
I suggest finding a contractor that will come in your home and give you an air flow analysis to determine tonnage and whether there are any issues with your duct work. The majority of issues that people have are a result of air flow problems and homes not properly insulated. You probably need a 3 or 3.5 ton system. A changeout from old to new should not cost you more than $7k installed.
I also recommend checking into a 2 stage system should you have the extra money. They are work the money and will save you monthly.
This post was edited on 2/2/16 at 8:41 am
Posted on 2/2/16 at 10:09 am to PhiTiger1764
quote:
it hasn't really got higher than 75ish outside this winter
shite anything over 65, especially at night and my A.C. is on
Posted on 2/2/16 at 10:13 am to PhiTiger1764
Reading the prices quoted in this thread is parallel to my experience buying a new inside/outside unit a month ago: prices are all over the map, sometimes for the same unit.
I ended up with a Rheem 4 ton system (my house is pushing 2k sq ft) and new duct work for $3972 with a 10 year warranty.
I ended up with a Rheem 4 ton system (my house is pushing 2k sq ft) and new duct work for $3972 with a 10 year warranty.
This post was edited on 2/2/16 at 10:14 am
Posted on 3/14/16 at 10:59 am to graychef
quote:
I paid $6,200 for inside/outside replacement last year. No duct work. Lafayette
Who did your work. I am in the Laffy area and am looking at getting mine redone. I have the unit original to the house 1997, it's finally dying.
2400sq. slab, incredible insulation, need duct work too.
Posted on 3/14/16 at 11:01 am to PhiTiger1764
I have a similar sized house and we paid around $5k 3 years ago to upgrade to a 4 ton from a 3 ton.
Posted on 3/14/16 at 11:03 am to PhiTiger1764
Call Air Handlers out of Denham. They'll treat you right.
Popular
Back to top
Follow TigerDroppings for LSU Football News