fishfighter

Finished installing that door. First was to install some 1 1/4"x 1/4" strips to block the door from a out swing and having the door flush with the inside of the room door frame.One can see that strip in the next picture. Installing the lock system. Then putting some lip stick on the latches. :...

Morning Frog. :cheers: Didn't get any rain yesterday, but just got a lite shower this morning....

Well hell, if that is the case, I am a artist. I shave my head. :lol:...

[quote]Crap. I know somebody who built a nice one off of these plans. I don't mind giving somebody 20 bucks too much. [/quote] Can you post some pictures of the plans? Is it a stich and glue plan?...

Morning people. :cheers:...

:lol:...

[quote]ETA: damnit, I just ordered pirogue plans. This board always has me spending money. [/quote] You could of got them for free. :lol:...

Not a fan of stich and glue builds. Things are very easy to get out of line. OP, if you going to build a boat, do it the right way which is about 5 different ways. :lol:...

[quote]Yup, almost dove season. Guaranteed storm to f up opening day.[/quote] '' Had teal landing in the dove mojo spread a few years back. :rotflmao: Really. :cheers:...

Y'all guys looking for good hardwood. Join this web site. [link=(http://forestryforum.com/board/index.php?board=11.0)]LINK[/link] There are sawers that do dry and sell some of their lumber. There are people from all over the country that post there. Hope that helps. If you contact someone,...

[quote]Rheem/Ruud and speaks well of them. [/quote] Very big fan of these units....

A good track saw works great, but there is a big BUT. The biggest problem comes when marking your lumber. To help, mark your tape and transfer the mark to the other side. One does NOT need a $500+ table saw. I use a old Craftmen that I bought will over 25 years ago and paid less then $100. It's o...

Morning Frog. :cheers:...

[quote]I retire at the end of the month.[/quote] :cheers: [quote] Might start sleeping in.[/quote] Not going to happen. :banghead: Morning people. :cheers:...

Thanks. I still have one more to build....

Now that is sick. :yack:...

[quote]Remove the screws from the plate. Shove toothpicks in the screw holes and then cut them off flush with the door frame. Slide the plate over to where it actually needs to be for the door to shut correctly and mark the screw holes. Drill new pilot holes. Put the plate back, but use 2"-2 1/2" sc...

Got my phone fixed. Guess my grandson deleted email app. :lol: Putting the door together. Used clamps and a square to keep everything lined up. [img]https://i.postimg.cc/TwnYrdqk/IMG-0387.jpg[/img] The door inserts are ship lap. Planned down to fit tight into the door frame. They float and ...

You to Frog. :cheers:...

[quote]I've never bought or owned a semi auto.[/quote] For a young person, go with a pump action. That will teach them to pick their shot....