- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Aftermarket Tilt & Trim on a 25hp Jonboat (Updated w/ Pics)
Posted on 9/25/18 at 9:46 am
Posted on 9/25/18 at 9:46 am
I'm tired of being my own tilt & trim on my 25hp Yamaha. From my limited research, there seems to be 3 aftermarket options:
CMC PT-35
Panther Model 55
Bob's Machine
Anyone have any personal experience with any of these? Seems like CMC is the most common, followed by Bob's, there's hardly any reviews on Panther that I can find.
I'd install it myself on a 14' aluminum jonboat, used in freshwater.
Thanks.
CMC PT-35
Panther Model 55
Bob's Machine
Anyone have any personal experience with any of these? Seems like CMC is the most common, followed by Bob's, there's hardly any reviews on Panther that I can find.
I'd install it myself on a 14' aluminum jonboat, used in freshwater.
Thanks.
This post was edited on 10/9/18 at 9:49 am
Posted on 9/25/18 at 9:56 am to slacker130
If you got the bones, go with the Bob’s. I’d follow second choice with the CMC. Have never heard of the Panther so would be leary because of that. Vance may make one too but I’m not positive.
Posted on 9/25/18 at 10:06 am to Cypressknee
we had a CMC for years on an old 50 hp mariner. All i can say is it out lasted the engine. Never had any issues with it and never added oil if i remember correctly either.
Posted on 9/25/18 at 12:38 pm to slacker130
why over think it? just put an oem unit on it LINK
Posted on 9/25/18 at 12:42 pm to keakar
quote:
why over think it? just put an oem unit on it
From my research, the OEM unit only works on outboards that had factory trim and not the outboards without it. Basically, only a replacement, not an add on.
Posted on 9/25/18 at 3:41 pm to reds on reds on reds
I pulled the trigger on CMC. Delivers by Friday.
Posted on 9/25/18 at 4:55 pm to slacker130
quote:
pulled the trigger on CMC. Delivers by Friday.
You made the right choice. I had the larger version for a 50hp Honda. Always worked. No issues. It just gets the job done!
Posted on 10/9/18 at 9:29 am to slacker130
Finished installing the CMC. I had to rig a couple of come-alongs to my garage ceiling to lift the motor off. Worked well. Still haven’t run it yet.
This post was edited on 10/9/18 at 9:35 am
Posted on 10/9/18 at 9:36 am to slacker130
Is that on a 1436 rivet jon?? Could you post some more pictures of how you reinforced the transom? I just got a 25 for mine
Posted on 10/9/18 at 9:41 am to celltech1981
I think it’s a 14/42. The boat had a Tohatsu 40? before the Yamaha 25. The guy reinforced the transom and took the 40 off. I’ll get some pics after work and post.
Posted on 10/9/18 at 10:07 am to slacker130
Thanks, I bet that boat was scary with a 40. Mine hit 33 with more to go in the pond yesterday
Posted on 10/9/18 at 12:19 pm to celltech1981
Aluminum diamond plate was welded in the corners and a aluminum plate on on both sides of the transom.
Posted on 10/9/18 at 5:13 pm to slacker130
Damn, thanks for posting. That is legit. I'm bolting a Jack plate and aluminum plate on mine but I think it still needs some extra support.
Posted on 10/9/18 at 7:02 pm to slacker130
quote:
I think it’s a 14/42. The boat had a Tohatsu 40? before the Yamaha 25. The guy reinforced the transom and took the 40 off. I’ll get some pics after work and post.
You know even with a 25hp motor, you are over rated there. What is the plate rated HP? I have a 14'/42 alweld that is maxed rated at 15hp.
Posted on 10/9/18 at 7:17 pm to slacker130
I have no suggestion. I thought it said “aftermarket tit and trim on a ....boat”. Came here for pics. Carry on.
Posted on 10/9/18 at 7:41 pm to fishfighter
quote:
You know even with a 25hp motor, you are over rated there. What is the plate rated HP? I have a 14'/42 alweld that is maxed rated at 15hp.
My plate says max of 25 hp. It’ll run mid 20s mph.
Posted on 10/9/18 at 7:46 pm to tenfoe
quote:
I thought it said “aftermarket tit and trim on a ....boat”. Came here for pics. Carry on.
Sorry to disappoint.
Popular
Back to top
Follow TigerDroppings for LSU Football News