- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Condensor fan won't start, next step ?
Posted on 3/25/18 at 11:39 am
Posted on 3/25/18 at 11:39 am
I've changed out the cap, and i try to kick start it but it wont take... what next ?
LINK
TIA Baws ...
LINK
TIA Baws ...
9
Posted on 3/25/18 at 11:40 am to Zilla
Fan motor
Posted on 3/25/18 at 11:41 am to Zilla
Nvm
This post was edited on 3/25/18 at 11:42 am
Posted on 3/25/18 at 11:44 am to djangochained
quote:
Fan motor
Yep.
Posted on 3/25/18 at 11:46 am to Zilla
quote:
what next ?
Checkbook
Posted on 3/25/18 at 11:47 am to Zilla
Lick the terminals to see if there's current.
Posted on 3/25/18 at 11:50 am to Zilla
Assuming the compressor itself is turning on, probably the fan motor.
Posted on 3/25/18 at 11:56 am to Zilla
I’ve had to change the contactor on a few of my units, apparently they go bad about as often as the capacitors
Posted on 3/25/18 at 12:05 pm to pongze
i think your flux capacitor is out.
Posted on 3/25/18 at 12:30 pm to djangochained
Is there a way to test the motor ?
Posted on 3/25/18 at 12:39 pm to Zilla
Check voltage tomfan. If no voltage check contactor. You can take contactor apart most of the time and maybe file the contacts down until you can get a new one. Also make sure the electrical connections are tight on everything
Posted on 3/25/18 at 1:40 pm to Zilla
Clean the contacts. Over time bugs or simple corrosion will cause the contacts to not close all the way.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News