Page 1
Page 1
Started By
Message
locked post

Anyone changed the back glass and frame out on a new iPhone, Xr?

Posted on 4/9/19 at 4:21 pm
Posted by Gaston
Dirty Coast
Member since Aug 2008
41694 posts
Posted on 4/9/19 at 4:21 pm
I’ve taken apart every iPhone to date (outside of the 8 and X), but this seems like taking 100% of the components out of the original one and installing them in a new frame. The battery would never survive, but the screen components, which are generally a PITA to swap, would stay intact. Just the back camera and light...Waterproofing would likely be less than perfect going forward.

I doubt it would be worth trying to just swap the glass, that would never seal back on.

Repair time says 1:35 on YouTube, usually they under estimate the shite out of these jobs. That’s scary.
Posted by VABuckeye
NOVA
Member since Dec 2007
38283 posts
Posted on 4/9/19 at 4:24 pm to
quote:

I’ve taken apart every iPhone to date


Why?
Posted by TigerOnTheMountain
Higher Elevation
Member since Oct 2014
41773 posts
Posted on 4/9/19 at 4:25 pm to
Is taking them apart the reason you buy the model designed for the impoverished?
Posted by Gaston
Dirty Coast
Member since Aug 2008
41694 posts
Posted on 4/9/19 at 4:27 pm to
Mostly to get made fun of on here...not really, but I caught a ton of shite for customizing one of them with a bamboo inlay.



People were saying it looked like T1-11 plywood.
This post was edited on 4/9/19 at 4:30 pm
Posted by el Gaucho
He/They
Member since Dec 2010
60076 posts
Posted on 4/9/19 at 4:39 pm to
I always debadge my phones
Posted by MSTiger33
Member since Oct 2007
21754 posts
Posted on 4/9/19 at 4:45 pm to
I usually plastidip my phone as soon as I get it.
Posted by UAinSOUTHAL
Mobile,AL
Member since Dec 2012
5338 posts
Posted on 4/9/19 at 5:22 pm to
Can't be done. Phone will never be the same. The glass is made to the back panel. You would be better off just paying Apple for the repair.
Posted by Mr.Perfect
Louisiana
Member since Mar 2013
17615 posts
Posted on 4/10/19 at 8:10 am to
UA.. im replying here since the other thread is waaaay down the page.

In the unlimitedville thread you mentioned bypassing the $30 from the ebay guy. i have tried two IMEI numbers i pulled from ebay pictures like you suggested but they are saying they are not compatible. i must be doing something wrong.

Would you possibly be willing to email me an IMEI you think will work?

tdmrperfect@gmail.com




Posted by Mr Perfect
Member since Mar 2010
17836 posts
Posted on 4/10/19 at 8:33 am to
Posted by saint tiger225
San Diego
Member since Jan 2011
49201 posts
Posted on 4/10/19 at 8:59 am to
quote:

I’ve taken apart every iPhone to date (outside of the 8 and X), 
So then you haven't taken apart every iPhone to date?
Posted by Mr.Perfect
Louisiana
Member since Mar 2013
17615 posts
Posted on 4/10/19 at 11:24 am to
Posted by S
RIP Wayde
Member since Jan 2007
173688 posts
Posted on 4/10/19 at 11:26 am to
Woah
Posted by Gaston
Dirty Coast
Member since Aug 2008
41694 posts
Posted on 4/10/19 at 11:30 am to
quote:

Can't be done. Phone will never be the same. The glass is made to the back panel. You would be better off just paying Apple for the repair.


Anything Apple can do, I can do. Take a replacement frame and swap all of the components over. Probably buy a new battery too, since the stick-em they use makes it very difficult to remove the battery without shorting it.

$55
Posted by lodgedup
Brightside
Member since May 2017
185 posts
Posted on 4/10/19 at 11:55 am to
my friend fricks up his iPhone all the time trying to DIY it. Go for it
Posted by Gaston
Dirty Coast
Member since Aug 2008
41694 posts
Posted on 4/10/19 at 11:56 am to
I’ve killed a couple.

This one was never put back together. Couldn’t get all that glue off.

This post was edited on 4/10/19 at 12:08 pm
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram