Page 1
Page 1
Started By
Message

West facing window issue

Posted on 7/11/22 at 10:43 am
Posted by Tigersbaw
Member since Oct 2020
18 posts
Posted on 7/11/22 at 10:43 am
Having issue with bedroom with two west facing windows. It is normally 3-4 degrees warmer than the rest of the house. Anyone use tint or film on windows to reduce heat on the inside? It does have storm windows on the outside already. Any other ideas other than running a ceiling fan all day?
Posted by ItzMe1972
Member since Dec 2013
11398 posts
Posted on 7/11/22 at 10:51 am to
I have used sunscreens to filter the light.

You could also install shutters or replace them with low e glass.

Plant a tree to shade the area? Just a few thoughts.
Posted by bbvdd
Memphis, TN
Member since Jun 2009
26886 posts
Posted on 7/11/22 at 12:16 pm to
I put solar tint from Lowes on my west facing windows.

Made a huge difference.
Posted by East Coast Band
Member since Nov 2010
65763 posts
Posted on 7/11/22 at 12:40 pm to
The previous owner to our current house removed 2 west facing windows from the bedroom.
We only have South facing windows and it is plenty enough to heat up the room.
My suggestion are trees. Long term.
Maybe an awning of sorts short term
Posted by TeaParty
Member since May 2022
935 posts
Posted on 7/11/22 at 1:23 pm to
I have tinted home windows before. And now technology has become so much better. Wednesday I am having tint put on my front door. It's insulated and double pane but not as cool as my Low E windows in the same room. The tint they are installing is 70% VLT so virtually clear and block out TSER of 51%


Total Solar Energy Rejected is the percentage of the total solar energy that is rejected. TSER includes all three: visible light, infrared and ultraviolet. The higher the percentage, the higher the percentage of solar energy deflected. Most window film/tinting shops use Infrared Rejection (IRR) as a guide to the level of heat rejection but IRR only covers 1/3 of TSER. Internationally, TSER is used as a guide as it is a more accurate way of measuring heat rejection as it includes all three (visible light, infrared and ultraviolet).
Posted by Celery
Nuevo York
Member since Nov 2010
11281 posts
Posted on 7/11/22 at 3:02 pm to
I had someone install 3M Prestige-60 film on my windows. It’s awesome. Definitely reduced heat and brightness. Mostly I was just tired of how bright it was and it’s really helped. Sort of expensive, but it’s not really tinted, so you can do part of the house and all your windows still match.
Posted by Tigersbaw
Member since Oct 2020
18 posts
Posted on 7/11/22 at 3:56 pm to
Awesome. This is what I am going to try. Thanks for the info
Posted by TigerTatorTots
The Safeshore
Member since Jul 2009
81659 posts
Posted on 7/11/22 at 6:03 pm to
Maybe a dumb question - does the film go on the inside or outside of the window?
Posted by Tigerpaw123
Louisiana
Member since Mar 2007
17621 posts
Posted on 7/11/22 at 6:16 pm to
Inside
This post was edited on 7/11/22 at 6:17 pm
Posted by Fox McCloud
Member since Oct 2020
3525 posts
Posted on 7/11/22 at 6:37 pm to
quote:

had someone install 3M Prestige-60 film on my windows. It’s awesome. Definitely reduced heat and brightness. Mostly I was just tired of how bright it was and it’s really helped. Sort of expensive, but it’s not really tinted, so you can do part of the house and all your windows still match.


Same. Love it. Not cheap though

Mine was prestige 40, not sure what the difference is. I opted for night vision 3m 25 for some windows. Same heat reduction and blocks more light, a good bit cheaper than prestige. Prestige is meant to still maintain outdoor view entirely while still getting heat reduction and some glare reduction.
This post was edited on 7/11/22 at 6:41 pm
Posted by RichJ
The Land of the CoonAss
Member since Nov 2016
4087 posts
Posted on 7/11/22 at 7:21 pm to
When we built, put Low E windows & glass panels in doors. Can’t recommend them enough!
Posted by michael corleone
baton rouge
Member since Jun 2005
6142 posts
Posted on 7/11/22 at 7:37 pm to
Anyone knows who does this in BR ?
Posted by LordSnow
Your Mom's House
Member since May 2011
5800 posts
Posted on 7/12/22 at 9:09 am to
quote:

bbvdd


Howd you cut it to fit?
Posted by Fox McCloud
Member since Oct 2020
3525 posts
Posted on 7/12/22 at 6:53 pm to
You use a razor blade. But it’s a nightmare if it’s a cheap material because it will drag and make the edges jagged. A lot of installers will just cut the white strip border out along the edge of the windows.
Posted by Booyow
Member since Mar 2010
4128 posts
Posted on 7/12/22 at 9:26 pm to
I used Custom Accents to install tint on all of my west facing windows and doors back in 2014 and then again in for a few replacements in 2020. I have 17 total windows that face west. Helps a ton.
Posted by Sir Saint
1 post
Member since Jun 2010
5427 posts
Posted on 7/13/22 at 12:14 pm to
Fair warning that many windows come with a 10 year manufacturer warranty and applying a film to the window will void the warranty.

I had looked into this for my house, which already has lowE windows (these are double pane windows with a transparent metal coating on the inner surface of one pane). I've been told that adding solar film to lowE windows is not as effective as other window types since the lowE surface coating and double pane insulation already protect you against a significant amount of heat. Ultimately decided against it. Guys in this thread that got the 3M prestige film and found it helped, was it applied to lowE windows?
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram