- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Question about back porch TV mount
Posted on 8/25/26 at 11:27 am
Posted on 8/25/26 at 11:27 am
We moved into a home 3 years ago, and the previous owner left the mount plate on the back porch brick wall. It's slightly off-level (the bubble on the leveler is not perfectly in the middle).
Can I untighten the bolts in the brick to adjust the plate slightly, or will that diminish the anchor strength when I tighten it again?
Also, I'm looking at a 70" TV for essentially a 10'x10' brick wall and about 11 feet viewing distance. Should I go bigger?
Can I untighten the bolts in the brick to adjust the plate slightly, or will that diminish the anchor strength when I tighten it again?
Also, I'm looking at a 70" TV for essentially a 10'x10' brick wall and about 11 feet viewing distance. Should I go bigger?
4
Posted on 8/25/26 at 12:19 pm to Crescent Connection
Many tv mounts have adjusters to make it level if the plate is not exactly turned level.
Posted on 8/25/26 at 1:05 pm to Crescent Connection
quote:
Can I untighten the bolts in the brick to adjust the plate slightly, or will that diminish the anchor strength when I tighten it again?
Tapcons?
Posted on 8/25/26 at 1:20 pm to Crescent Connection
set something like a spacer on the bracket of whichever side needs to be heightened (where the bracket hooks over the mount bar). Wrap tape around it, any kind of rig would do.
PS - I would avoid loosening anything in the brick if at all possible.
PS - I would avoid loosening anything in the brick if at all possible.
This post was edited on 8/25/26 at 1:20 pm
Posted on 8/26/26 at 8:13 am to Crescent Connection
Something else to consider. Is the level that you used accurate? I had one once that was slightly off. All you have to do to check is turn it end for end and recheck. If the bubble is the same then your level is good.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News