- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Shed Floor Coating - Plywood
Posted on 5/13/21 at 11:30 am
Posted on 5/13/21 at 11:30 am
I just finished building floor for metal shed. Pic below before I added 3/4" PT plywood on top.
Is there something I can seal top of floor to make it easier to clean? I have a bunch of leftover deck stain (Thompson water seal), or maybe like spar urethane? Or some type of paint that would be good?
Not too concerned about looks.
Is there something I can seal top of floor to make it easier to clean? I have a bunch of leftover deck stain (Thompson water seal), or maybe like spar urethane? Or some type of paint that would be good?
Not too concerned about looks.
6
Posted on 5/13/21 at 11:37 am to jyoung1
*nevermind didn't see metal shed
This post was edited on 5/13/21 at 11:40 am
Posted on 5/13/21 at 1:19 pm to jyoung1
What about some cheap linoleum? Or maybe some stall mats from Tractor Supply? Both would add durability and be easy to clean.
This post was edited on 5/13/21 at 1:22 pm
Posted on 5/13/21 at 2:07 pm to jyoung1
Maybe I'm just super lazy, but what kind of cleaning does a shed floor require besides blowing it off with the leaf blower every other year?
Posted on 5/13/21 at 2:16 pm to jyoung1
(no message)
This post was edited on 10/18/21 at 10:11 pm
Posted on 5/13/21 at 2:51 pm to jyoung1
They sell a cheap shed floor and workbench enamel paint in gallons in most paint departments. Just a hard drying cheap gray gloss that helps keep oil from soaking into wood.
Posted on 5/13/21 at 5:07 pm to jyoung1
personally i would leave it just plain raw plywood
but if you really want something better, give it a good coat of paint then put down cheap peel and stick floor tiles, they are like 30 cents each and you can do that whole floor for less then $50
This post was edited on 5/13/21 at 5:08 pm
Page 1 of 1
Back to top
Follow TigerDroppings for LSU Football News