- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Need Help With A Screen Porch
Posted on 4/12/17 at 9:08 am
Posted on 4/12/17 at 9:08 am
Finishing off a new house, and the young (but really good) contractor has never built a screened porch before. Must be an old folks thing. The question is: how to finish off the bottom of the screen? The bottom of the porch has a 2x4 about 2" off the ground. Don't know whether to attach there leaving a gap (that the cats could squeeze through) or something else. Any ideas and successful applications appreciated.
This post was edited on 4/12/17 at 9:09 am
Posted on 4/12/17 at 9:10 am to robchand58
Why would you leave a gap in a screened porch?
Posted on 4/12/17 at 9:10 am to robchand58
This baw does good work padnuh.
Posted on 4/12/17 at 9:10 am to robchand58
Anchor wood to the concrete and extend screen to concrete.
The best thing is to walk around and see screens you like and see how it was done.
If you want no gaps, you will need wood on the concrete.
The best thing is to walk around and see screens you like and see how it was done.
If you want no gaps, you will need wood on the concrete.
Posted on 4/12/17 at 9:13 am to robchand58
quote:
the young (but really good) contractor
He sounds amazing.
Posted on 4/12/17 at 9:15 am to robchand58
Need to remove that railing, doesn't look like they did a great job on it anyways. I'd use treated, or cypress/ cedar 2x4 on the bottom anchored to slab. You can run the screen all the way down to that or use plywood to make some panels that come up a few feet.
Either way you would regret having that gap. Also i'd use the plastic screen material. I used the metal the first time thinking it'd be stronger but it shows every kink and bend. The plastic is more forgiving.
Either way you would regret having that gap. Also i'd use the plastic screen material. I used the metal the first time thinking it'd be stronger but it shows every kink and bend. The plastic is more forgiving.
Posted on 4/12/17 at 9:21 am to robchand58
quote:
Don't know whether to attach there leaving a gap (that the cats could squeeze through) or something else.
Why would you leave a gap on a screened porch? I thought the whole purpose of screening a porch was so you could enjoy fresh air without mosquitoes pestering you.
Posted on 4/12/17 at 9:26 am to robchand58
quote:
and the young (but really good) contractor has never built a screened porch before.
He can't figure out a screened in porch and you let this sum bitch build a house for you?
quote:
about 2" off the ground
I don't think insects can fly below 3" from the ground so you should be safe.
Posted on 4/12/17 at 9:31 am to robchand58
quote:
2x4 about 2" off the ground
Posted on 4/12/17 at 9:34 am to junkfunky
quote:
junkfunky
Dick.
ETA: not hard to find, much like a picture of a nice screen porch.
This post was edited on 4/12/17 at 9:37 am
Posted on 4/12/17 at 9:34 am to robchand58
Have screens built in panels so they can be removed and hosed out, number them so you know where they go. Makes it easier to replace a torn screen too. The only screened in porch I have ever seen used had this, the panels were about 4x10.
Posted on 4/12/17 at 9:35 am to robchand58
Pics in exchange for solution.
Posted on 4/12/17 at 9:43 am to Spelt it rong
quote:
Dick.
Just telling OP to flash it using a fun visual.
I wouldn't want exposed wood directly on a concrete slab because it increases the chances of rot even if there is no standing water. I assume that's why the contractor kept it up 2".
Personally, I'd just screw some "L" flashing that's easily removable on the exterior side. Keeps shite from coming in and when it's time to hose down or blow off the porch you can remove a few pieces of flashing to let the debris (and water if hosing) out.
Posted on 4/12/17 at 10:45 am to junkfunky
Contractor is highly recommended and has been a dream to work with. But apparently, folks don't build screen porches anymore, opting for open air kitchens and the like. In his 20 years, no one has asked for a screened porch. He also mentioned wood on the slab as a solution, but said that would eventually rot.
This post was edited on 4/12/17 at 10:48 am
Posted on 4/12/17 at 11:11 am to robchand58
quote:
Contractor is highly recommended and has been a dream to work with. But apparently, folks don't build screen porches anymore, opting for open air kitchens and the like.
Down here they are usually aluminum framed. Wood framing is typical for a lattice wall.
quote:
In his 20 years, no one has asked for a screened porch. He also mentioned wood on the slab as a solution, but said that would eventually rot.
He's right. Moisture from humidity would sit in that crack between the wood and slab.
You could shim the gap with another 2x and some 1/2" board but you'll have to replace that bottom 2x once you start seeing the rot (purely aesthetics).
Like I said earlier I think your best bet is to have some type of fascia on the exterior side to cover the gap. Do you have a pic you can post or can you describe the edge condition?
Posted on 4/12/17 at 11:13 am to robchand58
quote:
He also mentioned wood on the slab as a solution, but said that would eventually rot
It will, but using the right wood it will still last quite a while.
On second thought I'd look into using some composite studs. They are expensive but probably worth it in the long run.
Lowes
Bottom line is leaving a gap that large defeats the entire purpose of having it screened to being with.
Posted on 4/12/17 at 11:16 am to GoldenSombrero
quote:
On second thought I'd look into using some composite studs. They are expensive but probably worth it in the long run.
That's a good idea, but he'll still have about 1/2" to fill. Maybe a backer and 1/2" caulk bead.
Posted on 4/12/17 at 11:16 am to robchand58
quote:
He also mentioned wood on the slab as a solution, but said that would eventually rot.
My screen porch has treated & painted 2"x 4"s attached to the slab. No signs of rot yet in 14 years. The screen is attached to the 2x4 framing with stainless steel staples. Then a I ripped down 2x4s into 1/4" strips to cover the staples and screen edges where it attaches to the 2x4 framing.
Construction looks similar to this google pic
Popular
Back to top
Follow TigerDroppings for LSU Football News