- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Super Skeeter Rebuild Thread (Pic Heavy)
Posted on 4/13/17 at 9:53 am to fishfighter
Posted on 4/13/17 at 9:53 am to fishfighter
Looks like 11 on my scale.
Posted on 4/13/17 at 10:17 am to fishfighter
quote:I'm of the "good enough" mindset, and usually pretty lazy when it comes to meticulous details like you're covering.
I would give it a 6.
You're blowing the top out of the difficulty gauge, so I'd say 11 or 12.
Awesome work Coach.
This post was edited on 4/13/17 at 10:52 am
Posted on 4/13/17 at 10:22 am to MrCoachKlein
Ridiculous rig!
What brand of fiberglass and resin did you use?
What brand of fiberglass and resin did you use?
Posted on 4/13/17 at 10:31 am to OhMy
The resin is from advanced plastics right outside of Metairie, I believe the stitch mat and chop is from FL, not sure where though
Posted on 4/13/17 at 5:17 pm to fishfighter
This post was edited on 4/14/17 at 9:46 am
Posted on 4/14/17 at 7:06 am to MrCoachKlein
What is a good time to call?
You can take that number down. Got it.
You can take that number down. Got it.
This post was edited on 4/14/17 at 7:08 am
Posted on 5/18/17 at 1:49 pm to MrCoachKlein
Update for y'all, I laminated my plywood decks and glassed them in...
After I got fiberglass on my balls, I was laying in bed and decided I don't want to do again for a long time, so I cut them out and went with all composite (rot proof and lighter)
Up next is cutting out my hatches, making them waterproof and ordering hardware (all decks will be flush) From there, I'll have the poling platform, sponsons and grab bar fabbed up. Then I'll finally be able to start sanding, priming, and painting her with Awlgrip
After I got fiberglass on my balls, I was laying in bed and decided I don't want to do again for a long time, so I cut them out and went with all composite (rot proof and lighter)
Up next is cutting out my hatches, making them waterproof and ordering hardware (all decks will be flush) From there, I'll have the poling platform, sponsons and grab bar fabbed up. Then I'll finally be able to start sanding, priming, and painting her with Awlgrip
This post was edited on 5/6/18 at 3:20 pm
Posted on 5/18/17 at 3:45 pm to MrCoachKlein
Thats skiff is going to be slicker than cow shite! Nive work.
Posted on 6/23/17 at 1:15 pm to YOURADHERE
Made a fish box out of 2" of closed cell foam and glassed it in.
Solid as a rock and only weighs 5lbs. It will be glassed into the floor (which is the same foam). I'm gonna to fab up a small crawfish pot type deal to put inside of it, that way I can just pull the fish out and let drain by the cleaning table
Solid as a rock and only weighs 5lbs. It will be glassed into the floor (which is the same foam). I'm gonna to fab up a small crawfish pot type deal to put inside of it, that way I can just pull the fish out and let drain by the cleaning table
This post was edited on 5/6/18 at 3:27 pm
Posted on 6/23/17 at 1:56 pm to ctiger69
It'll be a lot better once I get after it with sander and wrap it to match the boat.
This post was edited on 5/6/18 at 3:27 pm
Posted on 6/23/17 at 2:03 pm to MrCoachKlein
yeti ain't got nothing on that fish box...
Posted on 6/23/17 at 6:53 pm to reds on reds on reds
Nice project!! Saw a boat like that while in Pineville.
Posted on 6/23/17 at 9:26 pm to MrCoachKlein
I'm like a kid in a Candy shop!!! I can't wait to see the finish product. Top 10 thread in my book..
Posted on 6/24/17 at 1:01 am to LSU_Smash_the_West
This thread and the LA 1 truck thread are in my top 3 on TD
Posted on 7/14/17 at 4:38 pm to MrCoachKlein
Minor update (sorry for the pic size, first time using imgur)
Filled the old rivet holes with toothpicks
Sanded them down after the initial primer coat and filled them with 5200
Made a little scupper-ish thing out of PVC to run my fuel line through, it'll be covered in fabric shrink wrap so it'll look clean
Cut out some logos original to the boat, they still need some grinding and a few more holes drilled but they came out solid
What's left:
-sending floor/deck template to buddy so they can cut the teak (rub rail included)
-weld up the sponsons
-find someone that can bend 2" aluminum pipe (muffler shop?) for poling platform and grab bar
-install the vinyl wrap and then hardware
-order carbon fiber to make push pole (more on this later)
Filled the old rivet holes with toothpicks
Sanded them down after the initial primer coat and filled them with 5200
Made a little scupper-ish thing out of PVC to run my fuel line through, it'll be covered in fabric shrink wrap so it'll look clean
Cut out some logos original to the boat, they still need some grinding and a few more holes drilled but they came out solid
What's left:
-sending floor/deck template to buddy so they can cut the teak (rub rail included)
-weld up the sponsons
-find someone that can bend 2" aluminum pipe (muffler shop?) for poling platform and grab bar
-install the vinyl wrap and then hardware
-order carbon fiber to make push pole (more on this later)
This post was edited on 7/14/17 at 4:51 pm
Popular
Back to top
Follow TigerDroppings for LSU Football News