- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: All-Grain Brewing Step-by-Step
Posted on 1/14/13 at 8:39 am to LSUBoo
Posted on 1/14/13 at 8:39 am to LSUBoo
I ended up not brewing this weekend, damn.
Nice write up. Really intrigued by the no chill and batch sparging really. Even though I have been brewing for a while I keep changing up my process. Batch sparged the last batch and it came out fine. Typically I fly sparge though.
I am starting to get pumped about Zapp's.
Nice write up. Really intrigued by the no chill and batch sparging really. Even though I have been brewing for a while I keep changing up my process. Batch sparged the last batch and it came out fine. Typically I fly sparge though.
I am starting to get pumped about Zapp's.
Posted on 1/14/13 at 11:10 am to Fratastic423
quote:
I believe Baton Rouge water is at 8.8, is this correct?
Apparently so.
LINK
This post was edited on 1/14/13 at 11:17 am
Posted on 1/14/13 at 12:42 pm to BugAC
quote:
I was reading a section on water, and they advise PH levels of water
They're referring to the PH levels of the mash. Not necessarily the water. Correct?
Posted on 1/14/13 at 12:46 pm to s14suspense
BR water is on the alkaline side, but I never bother adjusting my PH and my lighter beers come out fine. I just add some calcium and I am good to go.
Posted on 1/14/13 at 1:03 pm to swampdawg
Well i think i may buy some of that ph 5.2 stuff.
Posted on 1/14/13 at 1:03 pm to s14suspense
quote:
They're referring to the PH levels of the mash. Not necessarily the water. Correct?
I believe so. Mash and sparge water.
This post was edited on 1/14/13 at 1:04 pm
Posted on 1/14/13 at 1:05 pm to BugAC
quote:
Well i think i may buy some of that ph 5.2 stuff.
Thinking I'll do the same soon. Seems like a no brainer for all grain brewing.
Posted on 1/14/13 at 1:28 pm to s14suspense
quote:
Well i think i may buy some of that ph 5.2 stuff.
Thinking I'll do the same soon. Seems like a no brainer for all grain brewing.
The 5.2 stuff can cause other problems...i.e. salty taste to beer.
Posted on 1/14/13 at 1:30 pm to Zappas Stache
quote:
The 5.2 stuff can cause other problems...i.e. salty taste to beer.
I've heard this, but have not noticed it in my beer for BR water. So maybe it depends on the water source of whether or not the 5.2 can add too much salinity to a batch.
Posted on 1/14/13 at 1:36 pm to Zappas Stache
quote:
The 5.2 stuff can cause other problems...i.e. salty taste to beer.
Really?
Curious to hear about some other people's water adjustments in BR.
Posted on 1/14/13 at 2:02 pm to s14suspense
I've never had a problem with it, but I'm only two all-grain batches in. (That I've tasted)
And I only used it on the strike water, not the sparge water... might need to correct that. Although I thought the main point was in enzyme conversion during the mash phase.
And I only used it on the strike water, not the sparge water... might need to correct that. Although I thought the main point was in enzyme conversion during the mash phase.
Posted on 1/14/13 at 2:10 pm to LSUBoo
quote:
And I only used it on the strike water, not the sparge water... might need to correct that. Although I thought the main point was in enzyme conversion during the mash phase.
Correct from what I know. Your mash should maintain its PH
Posted on 1/14/13 at 2:51 pm to LSUBoo
quote:
I've never had a problem with it, but I'm only two all-grain batches in.
I'm no expert, but I did research ph 5.2 a while back. It seemed the consensus among people that actually tested their Mash ph was 5.2 did not do anything. Most people claimed adding Calcium Carbonate (CaCO3) to raise the alkalinity (ph) or Lactic Acid to lower it was a much better solution. I too need to learn more about water chemistry but I usually just ask the guys at the LHBS what I should add for whatever style of beer I am brewing. I usally don't have to do anything. But I do add gypsum to all my IPAs which really brightens the hops.
ETA: The other thing you can do is boil your mash water before starting your mash. This will lower the alkalinity some......but BR water may be too low anyway...not sure.
This post was edited on 1/14/13 at 2:57 pm
Posted on 1/14/13 at 3:07 pm to Zappas Stache
I tried two batches with the general ph stabilizer stuff. Both times I tested the ph with those strips and it was still high - like 5.8-6.0, if I'm remembering correctly, though those color strips are never the same color as the legend on the container.
Posted on 1/14/13 at 3:11 pm to BottomlandBrew
Yeah, I don't actually do any PH testing, just use the 5.2 stabilizer. Maybe one day I'll have testing equipment too. That's pretty low on the list though, as I don't see it as extremely important.
Posted on 1/14/13 at 5:18 pm to BottomlandBrew
quote:
Yes, room temperature. The morning before I ferment itI will throw itin my fermentation cabinet and get it to pitching temps.
I use this container.
How hard are those to sanitize?
Posted on 1/14/13 at 5:57 pm to rds dc
quote:
How hard are those to sanitize?
Easy. In my research I read where people just pour the hot wort in there and let it do the sanitizing as it's still 190+ degrees. Just to be sure I give it a quick starsan rinse before dumping the wort in there. Once the wort is in there I squeeze all the air out, close it up, and turn it on it's side to make sure the hot liquid come in contact with the top for a few minutes and heat sanitizes it.
Posted on 1/14/13 at 8:03 pm to BottomlandBrew
quote:
Easy. In my research I read where people just pour the hot wort in there and let it do the sanitizing as it's still 190+ degrees. Just to be sure I give it a quick starsan rinse before dumping the wort in there. Once the wort is in there I squeeze all the air out, close it up, and turn it on it's side to make sure the hot liquid come in contact with the top for a few minutes and heat sanitizes it.
Ok, I'll give that a try. Combing this with BIAB is really going to streamline all-grain brewing for me.
Back to top
Follow TigerDroppings for LSU Football News