- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 7/27/22 at 4:11 pm to Landmass
quote:
Looks like the original bolt wasn't fine after all.
I'm not sold on the replacement working. I'll believe it when I see it.
Posted on 7/31/22 at 9:15 pm to HeadSlash
Ok, so I wanted to get something a bit more classic looking...
ended up buying this.
Far as I can see, should just need a lower, and then go from there. You guys seeing anything missing here?
ended up buying this.
Far as I can see, should just need a lower, and then go from there. You guys seeing anything missing here?
Posted on 7/31/22 at 10:10 pm to Scoob
I'd sure get some extra springs, might avoid some frustration.
Posted on 8/1/22 at 9:57 am to RogerTheShrubber
In honor of the assault weapons ban passing the house I decided to get a 2nd AR to complement the M&P Sport II. Got an Aero Gen 2 stripped lower and the PSA midlength MOE rifle kit. Will stick a carry handle on the Sport II and move the red dot to the PSA. Any advice on first build? What minimum tools will I need?
Posted on 8/1/22 at 11:33 am to TideCPA
Most handguards now come with a wrench for the barrel nut.
You will want a torque wrench.
Punch set
roll pin punch set
castle nut wrench
This is not needed but will save yourself a major headache.
Wheeler AR Pivot/Roll Pin Install Tool - Delta Series
I feel like I'm missing some stuff but I assume you have a hammer and allen wrench set.
ETA:
this is the best upper vise block I've seen. It's not necessary, but makes this much easier:
Brownells link
You will want a torque wrench.
Punch set
roll pin punch set
castle nut wrench
This is not needed but will save yourself a major headache.
Wheeler AR Pivot/Roll Pin Install Tool - Delta Series
I feel like I'm missing some stuff but I assume you have a hammer and allen wrench set.
ETA:
this is the best upper vise block I've seen. It's not necessary, but makes this much easier:
Brownells link
This post was edited on 8/1/22 at 11:38 am
Posted on 8/1/22 at 11:45 am to TideCPA
Get a Vltor A5 buffer system. Uses a longer 7 position tube, H2 longer buffer and an appropriate spring.
It will drop your empties in a coffee can at 4 o'clock. Several mfgs offer it as stock equip.
Punch set, you'll need it for the roll pins.
It will drop your empties in a coffee can at 4 o'clock. Several mfgs offer it as stock equip.
Punch set, you'll need it for the roll pins.
This post was edited on 8/1/22 at 11:50 am
Posted on 8/1/22 at 12:41 pm to bbvdd
quote:best block i have used is a reaction rod. they make knockoffs for cheaper than geissele
best upper vise block I've seen. It's not necessary, but makes this much easier:
Posted on 8/1/22 at 12:57 pm to bbvdd
quote:Great, thanks. I've already got a Wheeler torque wrench, so I'll order a castle nut wrench and a Wheeler roll pin punch set. I think the upper comes complete but I'll check the vice block if it's not.
Most handguards now come with a wrench for the barrel nut.
You will want a torque wrench.
Punch set
roll pin punch set
castle nut wrench
This is not needed but will save yourself a major headache.
Wheeler AR Pivot/Roll Pin Install Tool - Delta Series
I feel like I'm missing some stuff but I assume you have a hammer and allen wrench set.
ETA:
this is the best upper vise block I've seen. It's not necessary, but makes this much easier:
Posted on 8/1/22 at 2:17 pm to bbvdd
quote:
Brownells
speaking of brownells, get their bolt catch pin punch. it helps from marring up your receiver.
https://www.brownells.com/gunsmith-tools-supplies/rifle-tools/bolt-tools/dissassembly-tools/bolt-catch-pin-punch-prod26484.aspx
This post was edited on 8/1/22 at 2:18 pm
Posted on 8/1/22 at 3:55 pm to finchmeister08
Does STAG make a good AR-15? Got plenty of guns, but never owned an AR. Not really my thing. But at this point I guess I need to get one. Guy around here carries Stags. Looking at this one in 5.56
Posted on 8/1/22 at 3:57 pm to LSUballs
I've heard they're decent guns. Although, they did get in some trouble with the ATF a while back. Not sure how that affected things. How much are they asking for it?
Posted on 8/1/22 at 4:23 pm to upgrayedd
Little over $1,000. Which is what I'm seeing the gun priced at online...
Posted on 8/1/22 at 4:52 pm to LSUballs
quote:If you want to buy a lower and build it yourself PSA is running a special on their premium 20" rifle kit - $599. FN hammer forged barrel: LINK
Little over $1,000. Which is what I'm seeing the gun priced at online...
This post was edited on 8/1/22 at 4:54 pm
Posted on 8/1/22 at 5:32 pm to LSUballs
That seems to be the going rate for a decent A3 these days
Posted on 8/5/22 at 4:29 pm to upgrayedd
Shot my AR45 lastnight. Still having feeding issues.
Posted on 8/5/22 at 7:37 pm to TideCPA
Faxon barrel. Go with gunner profile. Great barrels. 16” or the 14.5” with pin and weld.
Posted on 8/5/22 at 7:47 pm to HeadSlash
quote:
Shot my AR45 lastnight. Still having feeding issues.
That sucks. Sorry dude
Posted on 8/5/22 at 8:42 pm to XenScott
quote:
Faxon barrel. Go with gunner profile. Great barrels.
Affordable too. Probably my next barrel.
Posted on 8/6/22 at 5:25 am to HeadSlash
Damn man
That sucks arse. Is there a gunsmith somewhere near you that cam have a look?
That sucks arse. Is there a gunsmith somewhere near you that cam have a look?
Popular
Back to top
Follow TigerDroppings for LSU Football News