re: Looking to buy an AR 10

Apparently the DD5 is all proprietary. Including down to the firing pin, bolt springs, etc.

Was looking at the LMT as well, but damn thing weighs 9.5 lbs WITHOUT accessories and everyone says it's way over gassed.

Damn if S&W M&p10 may not be the way to go here. For $1K, it's almost an unbeatable package and you can still add new rail, gas block, etc, with decent compatibility.

JP owner here. I have over 10k rnds thru mine (.223). It still shoots lights out to 600 yrds. Also JP's tigger is where it's at

quote:

---

Building an AR-10 isn’t as straight forward as an AR-15. You have to make sure the components are compatible more than with AR-15.

---

Yeah, I learned this while researching stuff. Someone else said the DD gun is full of proprietary parts, and it's not the only brand to be that way.

Like I said, we put a cheap BCA upper on a BCA lower. One reason I did that was to be sure everything fit itself.
There isn't just the DPMS vs Armalite issue, (most platforms are DPMS), there are different generations of DPMS.


There seems to be some subtle differences between the different styles, and I've seen reviews and online posts about things being loose or slightly out of alignment between brands.
Particularly relevant for the budget buyers, there seems to be some slop when pairing a BCA upper onto a PSA lower.

What I have come across, the BCA upper fits great with Aero, and also a brand called Noreen. The PSA is more "stick with PSA uppers".

So- I went with BCA, as the upper was by far the least costly, and I should be able to upgrade with Aero if I want. I also like that BCA makes side-chargers, I don't have it in 308 but have a couple in the AR 15 styles.

I am not pushing BCA for anyone, but if you're thinking about a build, or plan to use multiple uppers/calibers, dig around to make sure things fit. If BCA and Aero are compatible but BCA and PSA have slop, stands to reason Aero and PSA also have slop.

FN SCAR?