- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Mounting TV on brick fireplace (running cables inside the brick)
Posted on 9/13/16 at 9:42 am to soccerfüt
Posted on 9/13/16 at 9:42 am to soccerfüt
quote:Through the back of what? I'm planning on going thru the brick and then along the studs behind the brick and off to the side where I can exit into a closet basically.
If that's the only place to mount it, then I'd go all the way through the brick and out the back (if possible).
Posted on 9/13/16 at 10:07 am to The Mick
I considered this and ultimated decided a very thin white power cable that goes up and is stapled to the crown molding would be 'good enough' considering the hassle of doing what you're talking about.
here's a pic (sorry for shitty/blurry quality) and absolutely nobody notices the white extension cord.
it has a chromecast in back so no need for additional wiring.

here's a pic (sorry for shitty/blurry quality) and absolutely nobody notices the white extension cord.
it has a chromecast in back so no need for additional wiring.

Posted on 9/13/16 at 10:48 am to CAD703X
It looks like you have a two-way fireplace..? Do you have draft issues at all?
Posted on 9/13/16 at 10:52 am to The Mick
I have my cables RIGHT NEXT to the silver tube running up and out the chimney.
No problems yet.
Come to think of it, I don't know if we've lit a fire since I went cable-less.
No problems yet.
Come to think of it, I don't know if we've lit a fire since I went cable-less.
Posted on 9/13/16 at 10:56 am to CAD703X
Gotcha.
I can actually get into the fireplace through a closet believe it or not, there's an access panel so I can literally stand up in there next to the fireplace box and flue and run the cables if that's the route I go with this.
I can actually get into the fireplace through a closet believe it or not, there's an access panel so I can literally stand up in there next to the fireplace box and flue and run the cables if that's the route I go with this.
Posted on 9/13/16 at 10:59 am to GEAUXT
quote:
That sounds best left up to professionals
Mine is mounted on a brick chimney this way. Please OP get a professional
Posted on 9/13/16 at 11:01 am to MrSmith
quote:
Mine is mounted on a brick chimney this way. Please OP get a professional
All pros were amateurs at some point.
Posted on 9/13/16 at 11:03 am to MrSmith
quote:Why? The install itself is simple really. The only question I had is about the heat exposure to the cables the three times a year I might light a fire. I think the heat resistant conduit is the way to go.
Mine is mounted on a brick chimney this way. Please OP get a professional
Posted on 9/13/16 at 11:04 am to The Mick
if you can reach back in there were the wires will come through the brick just pull the conduit tight up against the brick.
Posted on 9/13/16 at 11:08 am to Nado Jenkins83
quote:
if you can reach back in there were the wires will come through the brick just pull the conduit tight up against the brick.
Posted on 9/13/16 at 11:09 am to The Mick
I think you will be fine.
i just wouldn't have it on the fireplace.
i just wouldn't have it on the fireplace.
Posted on 9/13/16 at 11:13 am to CAD703X
OP,
CAD703X's photo is the way you should do it. Run your wiring up the wall into the attic. You can even hide the cord with clever usage of wall strips. Just paint them to match the color of the wall or brick. No one will notice or care and it'll look good. I still recommend using a wireless receiver to cut down on television cords.
CAD703X's photo is the way you should do it. Run your wiring up the wall into the attic. You can even hide the cord with clever usage of wall strips. Just paint them to match the color of the wall or brick. No one will notice or care and it'll look good. I still recommend using a wireless receiver to cut down on television cords.
Posted on 9/13/16 at 12:05 pm to Nado Jenkins83
quote:Personal preference noted. The fireplace is dead center of the room so anywhere else it would be a side-angled view from most seats.
i just wouldn't have it on the fireplace.
Posted on 9/13/16 at 12:08 pm to HatefulTiger
quote:not when the flue is closed
It looks like you have a two-way fireplace..? Do you have draft issues at all?
seriously though i rarely use it. getting it going you run the risk of a cold chimney and smoke going into the rooms until the upward draft is established then you never get the smell out of the room.
we have a wood burning fireplace we use way more.
Posted on 9/13/16 at 12:34 pm to CAD703X
I've looked into this a good bit. My fiance bought a 110 year old house that used to have a two-way fireplace in it. She and I both want to eventually have it opened back up to burn real fires, but are a little concerned about the whole draft issue.
Posted on 9/13/16 at 12:46 pm to The Mick
quote:
The only question I had is about the heat exposure to the cables the three times a year I might light a fire.
If you turn your TV off when using the fireplace the cables will be fine.
Posted on 9/13/16 at 12:51 pm to HatefulTiger
quote:
but are a little concerned about the whole draft issue.
DO NOT OPEN WINDOWS as even a small breeze will carry smoke out of the fireplace.
also plan to spend $500-$1000 per side to buy good quality sealed glass enclosure that you can close or vent. you will be sorry if you cut corners here. you need a good set of sealed screens installed that you can quickly shut completely.
eta and if you actually want to use this to offset heating costs, something like this might be in order. fireplaces are TERRIBLY inefficient but if you turn it into a stove, they're pretty nice in cold weather.

This post was edited on 9/13/16 at 12:55 pm
Posted on 9/13/16 at 1:32 pm to CAD703X
I appreciate the info! Hopefully it won't be too much of a hassle.
Popular
Back to top


1







