- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Winter Olympics
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
na
Posted on 11/30/18 at 3:02 pm
Posted on 11/30/18 at 3:02 pm
(no message)
This post was edited on 2/8/25 at 2:49 pm
Posted on 11/30/18 at 3:06 pm to lnomm34
I just used my Troybilt today. That said, I would only buy one with a Honda engine.
Posted on 11/30/18 at 3:45 pm to lnomm34
Stay away from the inferior vertical shaft setups. These are the washers that look like a push mower. They are pretty much disposable and are good for light use. Good thing is a replacement pump is only about $60. They don't generate the pressure and volume for the big tasks. Go with a horizontal shaft axial pump setup at minimum. A triplex pump is even better and longer lasting, can usually be rebuilt but costs significantly more.
Posted on 11/30/18 at 4:12 pm to lnomm34
Honda motor with CAT pump if you want the best.
Mine is about 20 years old and still works great.
Of course use only non-ethanol gas and it will last a long time
Home Depot
Mine is about 20 years old and still works great.
Of course use only non-ethanol gas and it will last a long time
Home Depot
Posted on 11/30/18 at 4:16 pm to weagle99
quote:
I just used my Troybilt today. That said, I would only buy one with a Honda engine
That's what I have. It's a TroyBilt with a Honda 160cc engine that puts out 2600 PSI and 2.5 GPM. I came with 5 nozzle attachments that go from a wide span to pinpoint. I tend to use the one right in the middle for much of my work around the house. I have a long driveway that can park 5 cars plus a 400 sq. ft. slab in the back yard and a couple hundred sq. ft. of sidewalk and walkways in front.
I use it to clean all the concrete surfaces and once a year I will power wash my entire house which is pretty damn big and all wood. It's 20 ft. to my gutters and the house is over 75 ft. long and 25 ft. wide, all wood exterior with working shutters and 31 windows.
The only issue I have had with the PW is the pump went out about 3 years ago and I replaced it with a beefier one than came stock. It is best to not let the machine run without water flowing for very long as the impeller keeps turning in the pump and this heats up and can cause failure. I bought it in 06 when I decided to repaint my house after Katrina flooded the ground floor.
Posted on 11/30/18 at 4:32 pm to lnomm34
You're gonna want a surface cleaner for the driveway, or at least rent one. They typically have minimum flow requirements, which are usually around 3.5gpm. Bigger = more flow.
I've always bought from either Pressure Washers Direct , or Northern Tool. Been happy with all purchases. I wouldn't go less than 3500psi, because some stuff can be stubborn.
I've always bought from either Pressure Washers Direct , or Northern Tool. Been happy with all purchases. I wouldn't go less than 3500psi, because some stuff can be stubborn.
Posted on 11/30/18 at 5:52 pm to lnomm34
Hydro-quip in baton rouge is a high quality, pressure washer made locally.
Posted on 11/30/18 at 5:56 pm to lnomm34
I got a Ford one from Costco 2 years ago. Has been great so far
Posted on 11/30/18 at 6:46 pm to GoAwayImBaitn
Generac Speed Wash
Any experience with these? I was considering this for paver patio/driveway/sidewalk, and stucco on my house.
Any experience with these? I was considering this for paver patio/driveway/sidewalk, and stucco on my house.
Posted on 11/30/18 at 9:50 pm to lnomm34
I've been having a Karcher for 18yrs and it is still going strong. Whatever brand you get definitely get a Honda engine. Also if you don't use it often, and it doesn't have one already installed, add a fuel shut off valve.
Posted on 11/30/18 at 10:37 pm to lnomm34
I was going to buy a frame, engine, and pump and build my own until I found a Mi-t-m unit at a local pawnshop. Had a Subaru 9 HP engine and a AA pump. I rebuilt the pump, tuned up the engine (which is way better built than an equivalent Honda commercial unit), and bought new wand, hose, and nozzles from a local paint store. Basically have a heavy-duty power washer for $600.
Posted on 12/1/18 at 8:17 am to lnomm34
I’ve been told to just just the Costco $299 special pressure washers and just replace them when they die. I’ve got a 3k psi Sampson that works great around the house. I’ve pressure washed the house twice with it so if it dies tomorrow so be it
Posted on 12/1/18 at 12:04 pm to Man4others
(no message)
This post was edited on 2/8/25 at 2:49 pm
Popular
Back to top
9








