Started By
Message

Tin roof lean to plans

Posted on 10/15/18 at 4:12 pm
Posted by Timmayy
Houston
Member since Mar 2016
1592 posts
Posted on 10/15/18 at 4:12 pm
Looking at building a simple tin roof lean to off of a 40’ shipping container and looking for some ideas/plans. If anyone has built some leantos in the past and would want to send some ideas my way that’d be much appreciated.

Also looking for ideas/suggestions for either building off of the container or just building next to it. Want to avoid drilling into container
Posted by gumbo2176
Member since May 2018
15252 posts
Posted on 10/15/18 at 5:14 pm to
Lean to roofs are the easiest ones to frame and finish. Why not weld bolts to the container and bolt your wood framework down to it. That way no drilling into the container and a much stronger roof to boot since it will be bolted down.
Posted by DLauw
SWLA
Member since Sep 2011
6086 posts
Posted on 10/15/18 at 6:47 pm to
Pro tip: check square on your tin every 4th sheet.
Posted by Elusiveporpi
Below I-10
Member since Feb 2011
2576 posts
Posted on 10/16/18 at 7:39 am to
Here is what I built last year:
i used 2x6 for the rafters, double 2x8 for the beams, 6x6 for the post. (4x4's probably would do the job, but look way too small/ugly)



Posted by tb27688
Member since Jul 2011
1201 posts
Posted on 10/18/18 at 4:37 pm to
The problem you are going to run in to is flashing your lean to so it won’t leak. You will need to anchor very close to the top of you container so your flashing can run on top of your shipping container.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram