- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
A400 not dropping shells from magazine - what's wrong?
Posted on 1/4/17 at 1:45 pm
Posted on 1/4/17 at 1:45 pm
At the end of the hunt on Monday, my buddy's A400 wouldn't drop the sells out of the magazine so he was unable to remove the shells. By pulling back the bolt, he was able to eject the one in the chamber, but when he presses the float button that usually drops a shell out of the magazine, nothing happens. Has anyone encountered this?
Thanks in advance for your assistance.
Thanks in advance for your assistance.
Posted on 1/4/17 at 1:52 pm to The Last Coco
That doesn't sound good at all
870 don't do dis
870 don't do dis
Posted on 1/4/17 at 1:53 pm to The Last Coco
Does it still cycle when normal shooting?
May need a cleaning, or just have to bust off 3 at the end of each hunt for the rest of his life. His choice.
May need a cleaning, or just have to bust off 3 at the end of each hunt for the rest of his life. His choice.
Posted on 1/4/17 at 1:56 pm to The Last Coco
Does it have a magazine control lever on left side? My browning gold has a lever that will "lock" the rounds in the magazine, that allows you to switch the round in the chamber with a separate shell by hand. For instance if duck hunting and a hog runs up, you can toggle the lever, eject the shell, and load a slug / buckshot etc without disturbing the duck loads in the tube.
Posted on 1/4/17 at 1:57 pm to Thib-a-doe Tiger
quote:
That doesn't sound good at all
Sounds like a trip to to the gunsmith is in someone's future.
Posted on 1/4/17 at 2:04 pm to halleburton
quote:
For instance if duck hunting and a hog runs up, you can toggle the lever, eject the shell, and load a slug / buckshot etc without disturbing the duck loads in the tube.
You might want to look into the legality of that.
Posted on 1/4/17 at 2:05 pm to Clyde Tipton
Just using as an example, say you're dove hunting lol.
Posted on 1/4/17 at 2:09 pm to bababooey
not legal to have type of shot other than steel shot with you while duck hunting
Posted on 1/4/17 at 2:22 pm to Clyde Tipton
quote:
Does it still cycle when normal shooting?
Not sure. We were back at the parking area when all this went down and he couldn't fire it there. Then we went home so he hasn't had an opportunity to shoot it since.
Posted on 1/4/17 at 2:25 pm to The Last Coco
He has prob never taken the mag spring out during cleaning. Its a bit of a PITA with 4 pins in the retaining cap. That should take care of him though.
Posted on 1/4/17 at 3:28 pm to The Last Coco
Sounds like crud (technical term for mud, dirt, debris, etc.) is impeding the follower from moving freely in the magazine tube.
Or (much less likely) he has an out-of-spec shell that's stuck in the magazine tube.
Disclaimer: I am not a Certified Beretta Armorer.
Or (much less likely) he has an out-of-spec shell that's stuck in the magazine tube.
Disclaimer: I am not a Certified Beretta Armorer.
Posted on 1/4/17 at 3:32 pm to dawg23
quote:
Sounds like crud (technical term for mud, dirt, debris, etc.) is impeding the follower from moving freely in the magazine tube.
I've had this issue with my A390 2 times in the past 10 years.
Posted on 1/4/17 at 3:49 pm to dawg23
quote:
Sounds like crud (technical term for mud, dirt, debris, etc.) is impeding the follower from moving freely in the magazine tube.
Or (much less likely) he has an out-of-spec shell that's stuck in the magazine tube.
Disclaimer: I am not a Certified Beretta Armorer.
He just gave it a thorough cleaning a couple of weeks ago and he is anal about his stuff so that seems unlikely but I'll pass it along.
Posted on 1/4/17 at 3:59 pm to The Last Coco
Can he not manually depress the shell stop to release the shells from the mag?
Posted on 1/4/17 at 4:09 pm to The Last Coco
quote:
anal
Look, what y'all do in the duck blind is y'all business. These baws just trying to get that gun working
Posted on 1/4/17 at 4:23 pm to The Last Coco
quote:
e just gave it a thorough cleaning a couple of weeks ago and he is anal about his stuff so that seems unlikely but I'll pass it along.
Mine got gummed up around the follower. So much so that I took sandpaper to sand it down (the plastic part) to get it to slide through easier. Unless he took it and the spring out, he wouldn't know it was in need of cleaning.
Posted on 1/4/17 at 9:15 pm to The Last Coco
Shoulda bought a SBEII...
Posted on 1/5/17 at 3:41 am to The Last Coco
Tell him to buy a Versamax
Popular
Back to top
Follow TigerDroppings for LSU Football News