- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: On my way to Searchers 4x4- UPDATE: Death Wobble cured
Posted on 5/2/13 at 11:05 am to fightin tigers
Posted on 5/2/13 at 11:05 am to fightin tigers
From what I can see on my phone, your bottom driver's side LCA mount is bent to shite. Looks like it could be putting that heim in a bind. Is your tie rod bent also? Track bar/drag link look like they are at a decent angle. The more parallel the better though. Outer tie rods look bad also.
How does the pitman arm/drag link connection look? Can't really tell because it looks like you rubbed ky jelly on the camera lens
How does the pitman arm/drag link connection look? Can't really tell because it looks like you rubbed ky jelly on the camera lens
Posted on 5/2/13 at 11:07 am to PapaPogey
Jesus I hate new gas cans. My mom bought one that I ended up breaking the spout off of because I couldn't even work the thing
Posted on 5/2/13 at 11:10 am to Hammertime
quote:
Jesus I hate new gas cans. My mom bought one that I ended up breaking the spout off of because I couldn't even work the thing
yeah, they suck. Those are just to syphon into the boat.
Posted on 5/2/13 at 11:14 am to PapaPogey
The one she had, you had to turn and push in on the spout while holding down a trigger. All while holding and trying to pour a 5 gallon jug full of gasoline
Posted on 5/2/13 at 11:15 am to Hammertime
and they charge an arm and a leg for those. Gimme some normal shite for half the price please
Posted on 5/2/13 at 11:35 am to NYCAuburn
quote:
is your drag limk all bent up as well?
Drag link is brand new and straight
quote:
Is the drag link parallel to the track bar?
Pretty much. A drop pitman might would help, but it isn't drastic.
quote:
How are the joints on the control arms? tight? they should be hard to rotate with just your fingers
Yeah, they are tight. Actually someone recently proposed that I could have them too tight. Basically not allowing the control arms to have the necessary movement and transmitting the wobble. It seems far fetched, but maybe torquing exactly to the suggestions rather than tightening the bejesus out of them.
Posted on 5/2/13 at 11:40 am to fightin tigers
Heim joints definitely transfer vibrations. Over tightening them shouldn't be a problem though. They are just the joint with a bolt going through them. Look at my other post about your LCA and other stuff
Wouldn't cause death wobble from my experience though
Wouldn't cause death wobble from my experience though
Posted on 5/2/13 at 11:42 am to fightin tigers
I just left my house for class and didn't make it a mile down Highland before I had to turn around. This shite is out of control.
Posted on 5/2/13 at 11:42 am to Hammertime
quote:
From what I can see on my phone, your bottom driver's side LCA mount is bent to shite. Looks like it could be putting that heim in a bind.
They are Krawler joints so they are actually made to pivot.
quote:
Is your tie rod bent also?
Yeah, bent to shite. Had a straight one on for a while and it made no difference, this one had better TRE's, but not by much. That is the next area I will upgrade, but I need the larger rims to accommodate.
quote:
Can't really tell because it looks like you rubbed ky jelly on the camera lens
Part of the hazard of my job, the chemicals/powders I think are to blame. They get inside the lens of the phone.
Posted on 5/2/13 at 11:50 am to fightin tigers
For starters, I rocked a Casino G'zone Commando for a while. Toughest phone I have ever seen. Even fire resistant believe it or not. I have tested.
Those heim joints can only pivot so much. That driver's side one looks like it is binded up to me.
I was talking about the actual rod that goes to each knuckle though
Those heim joints can only pivot so much. That driver's side one looks like it is binded up to me.
quote:found your problem
Yeah, bent to shite.
I was talking about the actual rod that goes to each knuckle though
Posted on 5/2/13 at 11:50 am to fightin tigers
More pics
Drivers LCA mount, yeah I know the bracket is bent, but there is no movement.
Passenger drag link and tie rod
Drivers Drag link
Very little orbital movement in the drag link, takes a lot of force. Tie rod has orbital, maybe a little up/down on the passenger side.
Drivers LCA mount, yeah I know the bracket is bent, but there is no movement.
Passenger drag link and tie rod
Drivers Drag link
Very little orbital movement in the drag link, takes a lot of force. Tie rod has orbital, maybe a little up/down on the passenger side.
Posted on 5/2/13 at 11:53 am to PapaPogey
quote:
I just left my house for class and didn't make it a mile down Highland before I had to turn around. This shite is out of control.
As bad as that sounds it seems like ball joints. That is exactly what mine was. Speed caused it even without a bump.
Posted on 5/2/13 at 11:55 am to fightin tigers
I've got so much movement in my drag link and tie rod that it makes me wanna throw up. I'm about to light this bitch on fire and buy a Civic.
Posted on 5/9/13 at 11:03 am to PapaPogey
UPDATE: just got my Jeep back from the shop and the death wobble is GONE!!!
Posted on 5/9/13 at 11:14 am to Crawdaddy
Replaced tie rod ends and a blown out bushing on my trac bar. They also informed me that my muffler is completely blown out, but I already knew that.
Posted on 5/9/13 at 11:54 am to Soul Gleaux
Yep. My next DIY project will be to replace my shocks and steering stabilizer.
This post was edited on 5/9/13 at 11:55 am
Posted on 5/9/13 at 12:57 pm to PapaPogey
Glad to hear you got this fixed
Posted on 5/9/13 at 12:59 pm to PapaPogey
Sonuvabitch they put something back on there without tightening it.
Popular
Back to top
Follow TigerDroppings for LSU Football News