- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Posted on 3/25/22 at 1:08 pm to lsufan1971
Posted on 3/25/22 at 1:20 pm to HeadSlash
Just bought one similar in 300 blackout and it's awesome. Near identical.
Posted on 3/25/22 at 2:57 pm to HeadSlash
I think it would be just fine. I went with Areo on my AR10 for upper/lower and parts just because I wanted to make sure everything fit. The BCG is toolcraft on that upper so you should be fine.
I would get a Superlative Adj gas block. Makes running a breeze especially if you are gonna run a can on it.
I would get a Superlative Adj gas block. Makes running a breeze especially if you are gonna run a can on it.
This post was edited on 3/25/22 at 2:59 pm
Posted on 3/25/22 at 3:11 pm to lsufan1971
Just finished my AR10 build. Hoping to go shoot it this weekend. Just waiting on my indecisive self to make a decision on optic.
That triggertech is incredible, bbvd
That triggertech is incredible, bbvd
Posted on 3/25/22 at 6:01 pm to lsufan1971
I put a flat wire spring in my LR 308, can't believe how much smoother it operates
Posted on 3/25/22 at 7:34 pm to reds on reds on reds
quote:
That triggertech is incredible, bbvd
Yep, they are some of the best. Geissele is great but TT is next level.
Posted on 3/25/22 at 8:33 pm to bbvdd
quote:
Yep, they are some of the best. Geissele is great but TT is next level.
Completely agree. The CMCs I have a fine, great for the price point. I like the SSA-Es as well. But man this TT is incredible. I’ll be ordering another adaptable soon for the next build.
Posted on 4/2/22 at 8:35 am to reds on reds on reds
Shot my AR10 last night. Couldn’t get it to cycle. Tried every gas setting and I could get it to throw the old brass but wouldn’t pick up the next round. Put on the suppressor and had it cycling perfect and throwing brass at 4:00. Guess I’m not going to worry about it since I’ll never shoot in unsuppressed?
Posted on 4/2/22 at 8:50 am to reds on reds on reds
quote:
Shot my AR10 last night. Couldn’t get it to cycle. Tried every gas setting and I could get it to throw the old brass but wouldn’t pick up the next round.
I was having feed issues but first put another BCG in, that helped. Then put the flat wire spring in and I don't even need to put the adjustable gas block on. I'll save it for another rifle. The BCG was enhanced for suppressor use, but was a problem with the normal carbine buffer spring.
The spring smoothed everything out, no feed issues nor short primer strikes afterwards.
This post was edited on 4/2/22 at 8:59 am
Posted on 4/2/22 at 6:11 pm to RogerTheShrubber
H3 Buffer, Extended buffer tube, flat wire spring should fix just about any feeding issues.
Posted on 4/3/22 at 10:06 am to RogerTheShrubber
I'm jealous of that entire photo
Posted on 4/3/22 at 10:26 am to upgrayedd
The range location is pretty sweet. There's an icefield behind the first set of ridges. Tongass National Forest covers all the background area.
Posted on 4/8/22 at 7:30 pm to RogerTheShrubber
Just finished this one up. Still a couple things to add later, offset red dot and go ahead and form 1 a Geissele lower to match. Probably swap the trigger out too but excited to get out and give this one a shot.
Posted on 4/8/22 at 8:05 pm to ruger35
I need some yay or nay’s on a couple things.
I’m helping my dad convert an early 2000’s flat top Bushmaster with the A frame gas block/sight. Will be adding an SLR adjustable block and full length rail.
My question is, is a Midwest Industries key mod rail a good/sufficient option?
Will The only parts I need be a gas tube, block, and hand guard?
I’m helping my dad convert an early 2000’s flat top Bushmaster with the A frame gas block/sight. Will be adding an SLR adjustable block and full length rail.
My question is, is a Midwest Industries key mod rail a good/sufficient option?
Will The only parts I need be a gas tube, block, and hand guard?
Posted on 4/9/22 at 2:16 am to brightside878
Not the same handguard, but here is a step by step guide on how to remove a front sight post and install a free float handguard.
LINK
.
LINK
.
This post was edited on 4/12/22 at 3:38 am
Posted on 4/9/22 at 11:29 am to brightside878
Keymod over MLOK?
I'd also look at Aero Precision rails, especially the Atlas line.
I'd also look at Aero Precision rails, especially the Atlas line.
Posted on 4/9/22 at 12:18 pm to MetroAtlantaGatorFan
shite I meant M Lok
Posted on 4/9/22 at 12:44 pm to MetroAtlantaGatorFan
quote:
especially the Atlas line.
I've got Atlas R rail on my LR 308. Its perfect. I prefer the R to the S, I like the complete top rail.
I got a few of Aero's ultralight scope mounts too. Really like them.
Posted on 4/9/22 at 2:36 pm to RogerTheShrubber
quote:
I've got Atlas R rail on my LR 308. Its perfect. I prefer the R to the S, I like the complete top rail.
I got a few of Aero's ultralight scope mounts too. Really like them.
I love the Atlas S. It still has a rail at the very end for a backup sight.
Popular
Back to top
Follow TigerDroppings for LSU Football News