nwhsallstar2000

This is what I ended up going with: [img]https://i.imgur.com/evB0vgd.jpg[/img] [img]https://i.imgur.com/ge9aEwJ.jpg[/img] [img]https://i.imgur.com/zZap51Z.jpg[/img] ...

[link=(https://www.ebay.com/itm/Wireless-SNES-Retro-Controller-Gamepad-USB-receiver-for-PC-MAC-Raspberry-Pi/142790557904?hash=item213efb00d0:g:N6cAAOSwzFVa-SMx)]Here ya go[/link]...

That is the plan; full 4k gaming!...

I'll be installing all the games on the SSD. ...

This is the setup I'm planning on going with: Case: NZXT S340 CPU: Intel i7-8700K GPU:EVGA GeForce GTX 1080ti SC2 Motherboard: ASUS Prime Z370-A CPU Cooler: EVGA CLC 120 Liquid/Water CPU Cooler Memory: G.SKILL Ripjaws 16GB DDR4 2400 Power Supply: EVGA SuperNOVA 750 G2 Hard Drive: Seagate ...

I was offshore at the time, MC773. We were sitting there watching TV when we felt what we thought was someone in the crane moving a heavy object... the only issue with that is the crane operator was sitting with us at the time....

I can speak with first-hand experience, we used to kill the trout under lights when I lived in Lake Charles. Had a buddy that had a camp about a 1/4 mile from the landing....

Academy online sells the 112. Its 20% off with the code that is still working. Thats 500 off. No better time than now. Is that in the Riptide model?...

I currently have the Minn Kota Fortrex 36v (112 lbs.) trolling motor. I'm wanting to upgrade to an Ipolit one with the anchor mode. Which model would the OB recommend? ...

I’ve built a good bit of rods using the MHX brand, and I really like the blank. And everyone that I’ve built a rod for enjoy the rod. ...

I just spoke to the dealership where the boat is originally from, and they said that every 2104 Frontier with the 175 Suzuki leaves there with a 3x15x23 prop....

https://imgur.com/gallery/FKC2U...

- are your speed numbers GPS speeds? Never go off another guys speed. He could have done that with 5 gal of gas and no batteries or gear. I heard that the 175 zuke can run just as fast as my 200 on this hull. - Do you have a jackplate? - Where is your cavitation plate (above, at or below water...

I had it worked by “The Prop Shop” in Lafayette, but it’s the 3rd time that the prop has been worked. The machinist said the prop wasn’t bad. The numbers seem a little worse since I test drive with the guy, we did 40 mph @ 4000 RPMs. ...

I just had the prop worked. He didn’t mention the load he had to achieve those numbers. I don’t have a jack plate, I had the motor trimmed all the way up. ...

I have a 2015, 2104 frontier with a 2015 175hp Suzuki 4 stroke. My prop is a Suzuki 3x16x21.5 R. With 2 people, fishing gear, small ice chest, 3/4 tank fuel and whatever else someone usually has when fishing I can turn around 5100-5300 RPMs and top out around 47-48 mph. The guy I bought the boat sai...

[quote]What is it about the X1X that is forcing you to get a new TV? I'm sure I'm not the only one that doesn't follow game consoles, but knows something about TVs.[/quote] I'm wanting to get the most out of the X1X. With my current set up, it is not a "4K" TV. ...

Will have to replace my tv to accommodate the new XBOX ONE X. I'm looking for one in the 55"-65" range. I'm not wanting to spend more than $1,500. Would like a refresh rate of 240Hz. Can anyone recommend me one?...

Thanks for your input. 160 a night isn't bad at all....

My wife has been wanting to go on vacation there for a long time. I don't think I can put it off for another summer. What is the best website to go about booking a vacation? TIA...