- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
muzzleloader problem
Posted on 8/8/21 at 3:34 pm
Posted on 8/8/21 at 3:34 pm
have a slug and two gunpowder pellets stuck in barrel after a misfire. Subsequent attempts to fire the weapon have failed. How to I unplug the gun?
1
Posted on 8/8/21 at 3:40 pm to mikeytig
I don’t know what kind of gun you have, but i had to take the breech plug out and push it out with the rod from the breech end
Posted on 8/8/21 at 3:45 pm to Yukon7
It is an inline muzzleloader, thompson, I can get the breach out- is that what worked for you?
Posted on 8/8/21 at 3:51 pm to mikeytig
They make a bullet puller for muzzle loaders as well.
Posted on 8/8/21 at 3:56 pm to bbvdd
If you don't want to remove the breach-plug use this;
That's is what you are looking for, screws onto a cleaning or your ram rod, screw into the projectile and pull it out. $6 on Amazon
That's is what you are looking for, screws onto a cleaning or your ram rod, screw into the projectile and pull it out. $6 on Amazon
Posted on 8/8/21 at 6:52 pm to mikeytig
Bruh, take the breach plug out and push it out from the breach. If it’s too much for your ram rod get a wooden dowel from lows and tap it out with a hammer.
Posted on 8/8/21 at 9:25 pm to dakarx
if you use the puller, it may be a good idea to flood the chamber with water from the nipple beforehand
Posted on 8/8/21 at 9:35 pm to Wolfmanjack
quote:
take the breach plug out and push it out from the breach. If it’s too much for your ram rod get a wooden dowel from lows and tap it out with a hammer.
That’s what I used to do, pre 35 W.
Posted on 8/9/21 at 6:18 am to Ole Geauxt
Obviously take the nipple out, and beat it out with a rod & hammer. Pour some soapy water down the barrel too.
How did that happen ? Must learn from mistake to avoid future same.
Good to see you using a real primitive weapon. Any shoulder mounts you get done, you can look at them and know that you .......
How did that happen ? Must learn from mistake to avoid future same.
Good to see you using a real primitive weapon. Any shoulder mounts you get done, you can look at them and know that you .......
Posted on 8/9/21 at 7:17 am to mikeytig
quote:
It is an inline muzzleloader, thompson, I can get the breach out- is that what worked for you?
It's a significant reason why everyone switched to the inline design so that you can pull that breach plug and access the barrel.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News