- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Pull start recoil for pressure washer
Posted on 10/20/20 at 7:50 am to BiggerBear
Posted on 10/20/20 at 7:50 am to BiggerBear
quote:
If the rope broke when he pulled it, it is very unlikely that he needs to do anything but replace the rope. On my Yamaha, the hardest thing is to put the spring back into the spool. Once that is done, the rest is fairly easy.
I get that, but what I’m saying is I broke my pull on my toro mower and it was $15 and 3-4 screws to just replace the entire recoil pack, so that was new springs and everything. Took all of 2 minutes. I believe that was the only option, they didn’t sell the rope for it as a part. Now certainly you can diy, I was just letting the OP know that the OEM replacement part may be to replace the entire thing. It’s not expensive.
Posted on 10/20/20 at 8:29 am to baldona
quote:
I believe that was the only option, they didn’t sell the rope for it as a part.
Option number 1 would have been to just replace the rope. Not surprising there was no part number for the rope, because you can get some at any hardware store and should not have to order it from the OEM. Sure you could replace the whole recoil starter if the rope breaks, but it is certainly not necessary much less the only option.
Popular
Back to top
Follow TigerDroppings for LSU Football News