- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Fixing privacy fence help
Posted on 10/18/20 at 11:25 am
Posted on 10/18/20 at 11:25 am
Delta jacked up our fence, a lot of the damage consists of the posts being dislodged so the entire thing is leaning.
I was thinking if I can get it straight, brace it, I can backfill the post holes with quickcrete.
However I’m not sure if I’ll be able to push the fence to get it straight. There is nothing in my yard I can connect to (like a come along or something).
Any ideas or experience? Thinking worst case I’ll need more man power to push the fence and as we hold it come in with 2x4 to brace it, keep it there.
I was thinking if I can get it straight, brace it, I can backfill the post holes with quickcrete.
However I’m not sure if I’ll be able to push the fence to get it straight. There is nothing in my yard I can connect to (like a come along or something).
Any ideas or experience? Thinking worst case I’ll need more man power to push the fence and as we hold it come in with 2x4 to brace it, keep it there.
Posted on 10/18/20 at 11:42 am to bobdylan
You could always take off the pickets and push the post up by yourself.
Posted on 10/18/20 at 11:56 am to Aristo
That’s a good idea.
I think most would break however and the original sections (I added on to it) were installed with a nail gun not screws.
That may still be the most economical route though.
I think most would break however and the original sections (I added on to it) were installed with a nail gun not screws.
That may still be the most economical route though.
Posted on 10/18/20 at 12:19 pm to bobdylan
Could you drive a marsh anchor into the ground and come-along the fence posts to it?
It would also be a good time to fasten them all in with screws.
It would also be a good time to fasten them all in with screws.
Posted on 10/18/20 at 12:39 pm to good_2_geaux
I could give something like that a try.
Posted on 10/18/20 at 4:41 pm to bobdylan
My fence was leaning pretty good after sally. I dug our around the holes and braced it up with 2x4x10s leaned into the ground. Then I filled with more quickrete.
Posted on 10/18/20 at 5:16 pm to bobdylan
Tie it to your trailer hitch.
Posted on 10/18/20 at 6:33 pm to bobdylan
Take it down and build a new one with metal poles.
I fought mine for years and finally got tired of it, my neighbor and I split the costs and did the work ourselves.
rent an auger at home depot
I fought mine for years and finally got tired of it, my neighbor and I split the costs and did the work ourselves.
rent an auger at home depot
Posted on 10/18/20 at 7:23 pm to The Torch
Are metal better than 4x4?
Posted on 10/18/20 at 7:29 pm to OysterPoBoy
quote:
Get some chain and some rebar and make a ground anchor.
That is really slick.
Insurance adjuster is coming tomorrow to look at roof, will see if fence is covered, too.
Any rate y’all have given me some great ideas.
Posted on 10/18/20 at 8:16 pm to bobdylan
If the metal is aluminum...nothing to rot and metal screws go in like butter. If steel posts, make sure they are hot dipped galvanized. You will rot before they do. Commercial grade carports use galvanized steel posts. The car bends before they do. Home Depot and Lowe's should have aluminum posts. Galvanized steel will be a metal shop or frabricator.
Popular
Back to top
Follow TigerDroppings for LSU Football News