- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Need a new shaft for my driver
Posted on 8/23/17 at 8:12 pm
Posted on 8/23/17 at 8:12 pm
The shaft in my driver broke in half today. It broke across my back in my follow through. In case anybody was wondering the drive was about 300 down the middle on a 360yd par 4. I made par because I suck at golf.
The shaft was a 60gram stiff Aldila RIP that was cut down to play between stiff and xstiff. It fit me perfect. I don't know which end was cut or what it was cut down to. I actually bought the shaft from Janky when he was in a mood swing so maybe he can chime in.
Any suggestions for what might compare to that shaft if I can't find one like it for a price I'm willing to spend? I'm also assuming I can take the tip off of my broken shaft and put it on a new one (it's a ping G30) but I'm a little golf equipment illiterate
The shaft was a 60gram stiff Aldila RIP that was cut down to play between stiff and xstiff. It fit me perfect. I don't know which end was cut or what it was cut down to. I actually bought the shaft from Janky when he was in a mood swing so maybe he can chime in.
Any suggestions for what might compare to that shaft if I can't find one like it for a price I'm willing to spend? I'm also assuming I can take the tip off of my broken shaft and put it on a new one (it's a ping G30) but I'm a little golf equipment illiterate
Posted on 8/23/17 at 8:14 pm to malvin
Go back to your dirt baw job on west Texas, grab a piece of rebar, hot melt the head, and weld on the rebar.
Posted on 8/23/17 at 8:35 pm to malvin
I can fix you up. I work for a company that sells shafts.
Nobigdeal6969@gmail.com
Nobigdeal6969@gmail.com
Posted on 8/23/17 at 8:52 pm to malvin
You are clearly exerting too much nitro. If I was you I would go to a fitting place and ask for the stiffest shaft they have, take it home, and fill with cement.
Posted on 8/23/17 at 9:01 pm to malvin
quote:
The shaft was a 60gram stiff Aldila RIP that was cut down to play between stiff and xstiff
I have the same shaft and you can buy them on eBay. Mine is in a Titleist 913.
As far as stiffness, it's probably been cut on the butt end where your grip is. Try and connect the two broken ends together as best as possible and measure the length of your driver. Its likely been shortened from factory length.
If you like the ping club head, take the new shaft and club head with broken shaft in it to a club maker and switch them out. That easy.
Posted on 8/23/17 at 9:02 pm to malvin
HZRDUS T1100 or a Tensei White
Posted on 8/23/17 at 9:16 pm to Rhino5
quote:
. Mine is in a Titleist 913.
I didn't know you was a baw
Posted on 8/23/17 at 9:17 pm to Winston Cup
quote:
exerting too much nitro
Unpossible
Posted on 8/23/17 at 9:53 pm to malvin
Snag one, what head you putting it in?
Posted on 8/24/17 at 8:02 am to Front9Bandit
There's no way I'm spending that kind of money on a shaft not knowing if it will work for me. It sure is pretty though
Posted on 8/24/17 at 9:44 am to malvin
quote:
There's no way I'm spending that kind of money on a shaft
Front9 probably has 6 shafts at his house that he buys just to try out
Posted on 8/24/17 at 9:51 am to MNCscripper
I want to try something new for my M2, but don't know where to even start.
Posted on 8/24/17 at 9:54 am to malvin
I'll sell a Rogue M-AX 65X for $50
It's brand new with a Titleist tip
It's brand new with a Titleist tip
Posted on 8/24/17 at 10:06 am to AlxTgr
quote:
I want to try something new for my M2, but don't know where to even start.
What's wrong with the current one? Is it the stock shaft?
Posted on 8/24/17 at 10:23 am to Rhino5
quote:It's not that there is really anything wrong with it, but I do tend to lose it left more than I think i should. I just like fiddling-it keeps me interested in the game. It's the made for TM Kuro Kage in R. When I was fitted, I hit that shaft about the same in R and S, but R felt better so I went with it. I did not spend a lot of time with many other shafts.
What's wrong with the current one? Is it the stock shaft?
Posted on 8/24/17 at 10:48 am to malvin
I have a HZRDUS Black I'll sell for $150. Callaway tip.
Posted on 8/24/17 at 10:51 am to MNCscripper
Is it a senior flex? I may be interested.
Posted on 8/24/17 at 10:58 am to Front9Bandit
quote:
what head you putting it in?
He has a Ping G30
Posted on 8/24/17 at 11:40 am to Izzy Mandelbaum Sr
quote:
Is it a senior flex?
Stiff flex
Posted on 8/24/17 at 2:04 pm to MNCscripper
I'd possibly be able to step up to a regular flex, but that's not gonna work. Thanks though. Someone should grab it at that price.
Popular
Back to top
Follow TigerDroppings for LSU Football News