Page 1
Page 1
Started By
Message

Best inexpensive electric smoker

Posted on 3/15/25 at 8:13 am
Posted by Creolesote
Member since Feb 2025
213 posts
Posted on 3/15/25 at 8:13 am
I want an electric smoker just to smoke homemade sausage. I have an offset wood smoker when I need to smoke longer or bigger and can watch it.

What would be a good $200-400 electric smoker that will get and keep a temp from 250-350 degrees?
Posted by tigersmanager
Member since Jun 2010
9097 posts
Posted on 3/15/25 at 9:19 am to
Woodfire grill xl
Posted by PerplenGold
TX
Member since Nov 2021
2213 posts
Posted on 3/15/25 at 9:41 am to
This works very well and is a pretty good bargain

Masterbuilt
Posted by BilbeauTBaggins
probably stuck in traffic
Member since May 2021
7645 posts
Posted on 3/15/25 at 9:41 am to
Academy sells some cheap Masterbuilt box smokers. They use wood chunks. We've had ours for over 5 years and had to replace the control panel (warranty) and heating element (less than $25 IIRC) but they work well when functioning. I think it was just over $220 at the time. The max temp is 275 degree. There's no need to go much higher than that if you're just smoking food.
Posted by Creolesote
Member since Feb 2025
213 posts
Posted on 3/15/25 at 10:07 am to
Can you load chunks of wood into the feeder box or just chips. I like to use oak and pecan chunks.
Posted by NOLAIrish
Member since Jun 2013
11 posts
Posted on 3/15/25 at 2:46 pm to
Just chips. It doesn't have a true smoker box, just a small, shallow pan that sits on top of the heating element and catches the chips as you load them. It's good value for money and very low maintenance, but expect a much lighter smoke and less bark formation. It's a good entry option for doing long smokes you don't want to babysit and smaller items that don't need as much smoke.
Posted by LSUGUMBO
Shreveport, LA
Member since Sep 2005
9475 posts
Posted on 3/15/25 at 3:31 pm to
You can get the masterbilt Cold Smoke attachment for longer smokes and smaller chunks. $89 on Amazon. I’m on my third Masterbuilt in probably 15 years, and I really like them. Mine’s attached right to the smoker since I don’t cold smoke, so it’s really just a big reservoir that will get you an extra couple of hours before having to reload.

Cold Smoke Box- Masterbilt
Posted by Creolesote
Member since Feb 2025
213 posts
Posted on 3/15/25 at 4:20 pm to
So does that attachment have a separate heating element? Like an offset smoker? So you just use the master built smoker as a cabinet for cold smoke? Or turn the heat on both of them to hot smoke the meat in the main smoker cabinet?
Posted by LSUGUMBO
Shreveport, LA
Member since Sep 2005
9475 posts
Posted on 3/15/25 at 5:32 pm to
quote:

So does that attachment have a separate heating element




Yes- it’s got an electric coil in the bottom. I usually turn it on for 30-60 minutes to get the coals going, then turn it off to let it feed itself and not burn too quickly. My first box melted down because it got too hot If you have a long smoke like a pork butt, you can turn it back on if necessary. It’s been worth the extra expense so you don’t have to feed chips in as often. The chips will catch fire and burn, not smolder if they’re too dry, so I’ll sometimes soak them a little to make sure they don’t burn too quickly.

You can run a dryer vent so you just get the smoke and not the heat, but like I said, I don’t cold smoke, so I’ve never used it like that. It fits right in to the smoker where the chip cylinder goes, and there’s a screw attachment that keeps it connected so the smoke loss is minimal.
Posted by Dam Guide
Member since Sep 2005
16516 posts
Posted on 3/15/25 at 6:31 pm to
Masterbuilt with an amnps pellet tray, great for smoking cheese too where you can just leave the element off.

LINK

Posted by Creolesote
Member since Feb 2025
213 posts
Posted on 3/16/25 at 9:20 am to
What is the point if you have to light the wood , in an electric smoker.
Posted by PerplenGold
TX
Member since Nov 2021
2213 posts
Posted on 3/16/25 at 9:28 am to
quote:

Can you load chunks of wood into the feeder box or just chips. I like to use oak and pecan chunks


It is a bit of a hassle reloading chips every 2-3 hours but after 4-5 hours the meat has taken in about as much smoke as it will. This was a 12lb butt that took a little less than 16 hrs. It started to fall apart a bit cracking the bark.


I’ve never been able to get much of a smoke ring on brisket but it tastes great. Sounds like that’s not a concern for you having an offset.
This post was edited on 3/16/25 at 9:30 am
Posted by Dam Guide
Member since Sep 2005
16516 posts
Posted on 3/16/25 at 12:08 pm to
quote:

What is the point if you have to light the wood , in an electric smoker.


Most electric smokers are not very good at the smoking part. Cold smoke isn’t possible with them either. Masterbuilt chip loaders are particularly garbage, a Masterbuilt with an amnps makes it a decent smoker and can go around 11 hours without refilling the tray, so you aren’t adding too much work to it, especially since you aren’t refilling the chip loader all night.

Posted by Dam Guide
Member since Sep 2005
16516 posts
Posted on 3/16/25 at 12:11 pm to
quote:

I’ve never been able to get much of a smoke ring on brisket


You aren’t going to get smoke rings on electric unless you do a fake one with pinking salt brine. Just how that style of smoking works.
This post was edited on 3/16/25 at 12:12 pm
Posted by PerplenGold
TX
Member since Nov 2021
2213 posts
Posted on 3/16/25 at 12:22 pm to
quote:

You aren’t going to get smoke rings on electric unless you do a fake one with pinking salt brine. Just how that style of smoking works.


Yeah, the flavor is still there at least. I got rabbit holed reading some chemistry mumbo jumbo. Supposedly, adding some charcoal to the wood chips helps but I haven’t tried yet.
Posted by LSUGUMBO
Shreveport, LA
Member since Sep 2005
9475 posts
Posted on 3/16/25 at 6:25 pm to
quote:

You aren’t going to get smoke rings on electric unless you do a fake one with pinking salt brine.


Yeah I’m not that concerned with smoke rings. I much prefer the convenience of an electric and not having to worry about temperature fluctuations if I can’t be next to it all day long. I don’t have any problems with smoke flavor, though.

Just pulled this 3lb prime sirloin off


Turkey breast is still hanging out. Maybe another hour or so.

ETA- the biggest downside to the Masterbilt is the max temp is 275. I wish I could get crispier skin on chicken without having to light the grill, too.
This post was edited on 3/16/25 at 6:27 pm
Posted by Rip N Lip
Zambodia
Member since Jul 2019
6972 posts
Posted on 3/16/25 at 9:06 pm to
Posted by Loup
Ferriday
Member since Apr 2019
15561 posts
Posted on 3/17/25 at 7:11 am to
I used to use a 30" Masterbuilt with a pellet tube in it. Worked well for sausage but if hanging it you can only fit about 15 lbs at a time. I now have a Pitt Boss vertical pellet (around $400 if I remember right) and I can hang a lot more sausage plus I think it does a better job. For some reason with the electric I couldn't ever get the sausage to all be uniform in color. Don't have that problem with the pellet.

The Masterbuilt only goes up to 275 degrees. The Pit Boss goes up to 450. If I were going to get another electric I'd get the Masterbuilt 40, much more room.
Posted by Creolesote
Member since Feb 2025
213 posts
Posted on 3/17/25 at 11:31 am to
Yea I’m just using the electric smoker to smoke homemade sausage. Mostly venison and pork we shoot and make into Italian, Cajun, chaurice, andouille, kielbasa etc. Been using an old fridge and a very small tent wood stove piped in or a hot plate and cast iron wood chip plate. Temp control is an issue though and its size.

Might build one using a 1000watt hot plate and more like 4x6.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram