Page 1
Page 1
Started By
Message

Ethernet to HDMI Converter

Posted on 1/28/20 at 3:38 pm
Posted by Weekend Warrior79
Member since Aug 2014
19056 posts
Posted on 1/28/20 at 3:38 pm
Would an ethernet to HDMI converter allow me to plug my TV directly into my modem so I do not have to rely on my WiFi signal?

Wanting to do this for a TV, without ethernet input, that I have set-up in my backyard. The TV is approx. 50 feet from my modem, 1 interior wall & 1 exterior wall between.

Also, if the ethernet is plugged into HDMI #1, and my Roku is in HDMI#2; would I still need the WiFi connection for my Roku to work, or can I use the ethernet connected to the TV for the signal?
Posted by Korkstand
Member since Nov 2003
29000 posts
Posted on 1/28/20 at 3:52 pm to
No, HDMI-ethernet adapters are for extending the length of the HDMI cable. It requires an adapter on each end to make it HDMI-ethernet-HDMI.

The HDMI port on your TV doesn't know how to "talk" to a network. Those adapters just pass the video signal along a different type of cable.


If you have a Roku, why do you want your TV to be online too? Many people intentionally prevent their TVs from reaching the internet.
Posted by Weekend Warrior79
Member since Aug 2014
19056 posts
Posted on 1/28/20 at 3:56 pm to
quote:

If you have a Roku, why do you want your TV to be online too?

I was looking to avoid the fluctuating WiFi signal to the TV by having a direct connection that the Roku could feed off of. Figured it wouldn't work, but had to ask.

Would it work for a Smart TV if it had the Hulu or Prime apps already on the TV?
Posted by BaddestAndvari
That Overweight Racist State
Member since Mar 2011
18578 posts
Posted on 1/28/20 at 3:56 pm to
quote:

Would an ethernet to HDMI converter allow me to plug my TV directly into my modem so I do not have to rely on my WiFi signal?


No, that's not how it works

quote:

Wanting to do this for a TV, without ethernet input, that I have set-up in my backyard. The TV is approx. 50 feet from my modem, 1 interior wall & 1 exterior wall between.


You are going to have to run an extender closer to the TV... or buy a TV with a physical plug

quote:

Also, if the ethernet is plugged into HDMI #1, and my Roku is in HDMI#2; would I still need the WiFi connection for my Roku to work, or can I use the ethernet connected to the TV for the signal?


You are extremely confused... let me start off with the simple truth - NOTHING is using HDMI 1.4 or 2.0... nothing, literally nothing, it was a pie in the sky idea that just never took off.

2) In order for "Ethernet over HDMI to work" you are still going to have to plug a device (most models had the TV being plugged up) to an Ethernet cord and then the Internet would be "shared" to the other HDMI devices plugged up to your TV - think about your 2nd question, you wouldn't need to connect your Roku to your internet, because the TV would share it's connection with the Roku. This still requires a physical cat 5e or 6 cord run to your TV (Edited to Add: This didn't happen, it in theory would have, but it didn't happen, there was no real world usage for it, so it NEVER happened)

3) ... Ethernet to HDMI, or HDMI to Ethernet isn't really a thing, it's still a physical connection that must exist if you are using the Ethernet over HDMI.

Your best bet is to extend your wifi or run a cat5e or cat6 cord out to your new TV... I would recommend running a cat5e or cat6 out to the area and then setting up an unmanaged switch close to your devices.
This post was edited on 1/28/20 at 4:06 pm
Posted by Korkstand
Member since Nov 2003
29000 posts
Posted on 1/28/20 at 4:01 pm to
quote:

I was looking to avoid the fluctuating WiFi signal to the TV
Your best bet is to boost your wifi with either a higher end router or one of the mesh wifi systems. Or if you want the best reliability possible, get a roku ultra which has an ethernet port, and run a cable to it.
quote:

Would it work for a Smart TV if it had the Hulu or Prime apps already on the TV?
Would what work? If you mean getting internet through the HDMI port, then no. The TV either needs wifi or an ethernet port. Again, though, I wouldn't bother with getting the TV online, it doesn't need it. Just get a stable connection to the roku.
Posted by Weekend Warrior79
Member since Aug 2014
19056 posts
Posted on 1/28/20 at 4:07 pm to
Thanks. I was definitely confused on the application. This helps simplify it for me.
Posted by Weekend Warrior79
Member since Aug 2014
19056 posts
Posted on 1/28/20 at 4:08 pm to
Thanks for helping break it down for me, definitely helpful.

quote:

Roku ultra

May look into this if it continues to be a problem
Posted by gobuxgo5
Member since Nov 2012
10118 posts
Posted on 1/28/20 at 4:13 pm to
Roku Stick Ethernet Adapter

How about something like this?
Posted by Korkstand
Member since Nov 2003
29000 posts
Posted on 1/28/20 at 4:38 pm to
quote:

Roku Stick Ethernet Adapter

How about something like this?
quote:

Device Compatibility
Fire TV (Gen 1) and Roku devices are NOT supported
Posted by gobuxgo5
Member since Nov 2012
10118 posts
Posted on 1/28/20 at 4:46 pm to
I meant something like it lol
Posted by couv1217
Baton Rouge, LA
Member since Sep 2007
3456 posts
Posted on 1/31/20 at 7:41 am to
What about just running a hard wire from the modem through the ceiling into the ROKU? I ran a wire, had it come through the wall then plugged into an Ethernet splitter. Split it to Roku, Amazon Cube, and PS4.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram