3
- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
What Torque Wrench For ASR?
Posted on 10/14/26 at 4:00 pm
Posted on 10/14/26 at 4:00 pm
What are yall using?
Posted on 10/14/26 at 5:56 pm to 257WBY
What is “ASR”?
Posted on 10/14/26 at 6:09 pm to 257WBY
Active Spring Retention for a can? For bigger stuff that really counts I have Precision Instruments split-beam and dial-type wrenches. For smaller fasteners and screws I have several torque drivers from Capri, Proto, and Wheeler. For stuff in-between I have Craftsman, Kobalt, Gear Wrench, and AC Delco clicker and digital torque wrenches. Without knowing exactly what you are trying to do and how much torque it requires there isn't much advice that can be given.
Posted on 10/14/26 at 6:46 pm to 257WBY
They make ASMR videos for everything now, I’d start with youtube.
Posted on 10/14/26 at 7:05 pm to TheDrunkenTigah
Yeah, I look at those but don’t really find the wrenches that they’re using. So I started with the experts.
Posted on 10/14/26 at 7:08 pm to Clames
I’m screwing on a brake to the end of the barrel and then screwing a silencer co suppressor on over it. I think they’re calling for 20-30 pounds of torque.
Posted on 10/14/26 at 7:15 pm to 257WBY
I’m fairly certain that I used my calibrated forearm for the first few I put on 
The last one I did, I used a regular old torque wrench with a crows foot.
The last one I did, I used a regular old torque wrench with a crows foot.
Posted on 10/15/26 at 12:20 am to 257WBY
quote:
I think they’re calling for 20-30 pounds of torque.
Sounds like being very precise isn't a big deal, could just go to Lowes and get a Craftsman 3/8" clicker for $60.
Posted on 10/15/26 at 5:36 am to Clames
Will that craftsman fit around the barrel accessory?
Posted on 10/15/26 at 7:03 am to 257WBY
You’ll need a crowd foot wrench too. Harbor freight has cheap sets.
Posted on 10/15/26 at 10:34 am to Theduckhunter
Ok, I put a magpul wrench on it with five spacers and roksett. Looks like it’s about right.
Posted on 10/15/26 at 10:39 am to 257WBY
You'll need a crowfoot wrench for it and you'll need to make sure you set it perpendicular to the wrench handle to get the correct torque value you set otherwise you'll have to do some extra math. Clearance with the head of the torque wrench can become an issue with what you are trying to do so a short extension would help.
Posted on 10/15/26 at 10:49 am to 257WBY
quote:
Looks like it’s about right.
Thats all ive ever done. I use loctite 272 though. Stack shims till hand tight is about 1/4 turn off of straight, take it off, goop it, tighten till it looks straight or is goodntite, pew pew pew pew
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News