Page 1
Page 1
Started By
Message

Bow peep site issue

Posted on 11/19/26 at 11:38 am
Posted by hubreb
Member since Nov 2008
2194 posts
Posted on 11/19/26 at 11:38 am
I'm pretty sure my peep site is sliding up and down on my bow, I can get it dialed in and then set it down for a little bit, go back and shoot and it will either be 10 inches high or low....get it dialed in again and it will reverse and do the same thing - how do I get it anchored with out bringing it to a bow shop?
Posted by Jack Daniel
Gold member
Member since Feb 2013
30173 posts
Posted on 11/19/26 at 11:55 am to
Does it not have serving securing it to the string?
Posted by Got Blaze
Youngsville
Member since Dec 2013
10302 posts
Posted on 11/19/26 at 11:59 am to
quote:


I'm pretty sure my peep site is sliding up and down on my bow

Who installed it ? Does it look like this ? If not, go to a knowledgeable archery technician and have it done properly.
If installed and tuned correctly, the PS shouldn't slide up/down the string.
Posted by hubreb
Member since Nov 2008
2194 posts
Posted on 11/19/26 at 12:54 pm to
it looks like that picture, but the strings on top and bottom along with the peep it self slide up and down the string with ease
Posted by Jack Daniel
Gold member
Member since Feb 2013
30173 posts
Posted on 11/19/26 at 1:00 pm to
It wasn’t tied in right. The serving shouldn’t slide up and down your string
Posted by Success
Member since Sep 2015
2002 posts
Posted on 11/19/26 at 3:24 pm to
See if you can move it yourself. If it’s tied like that pic and moves, it’s not tied in. If it doesn’t move easily, your bow is likely out of time.
Posted by tigerfoot
Alexandria
Member since Sep 2006
62159 posts
Posted on 11/19/26 at 3:27 pm to
If we are talking ten inches at 20’or don’t should easily be able to tell when you come to anchor. It’s either going to be mm within your anchor or not.

So just draw with your eyes closed. It should bright there.
Posted by hubreb
Member since Nov 2008
2194 posts
Posted on 11/19/26 at 4:53 pm to
Brought it to a shop, mu serving was more like small knots, guy could easily slide them away from site...said since i bought a pre done kit it wasn't set up properly in a few spots...corrected them all
Posted by Jack Daniel
Gold member
Member since Feb 2013
30173 posts
Posted on 11/19/26 at 5:27 pm to
Cam timing will not make a peep float up and down
Posted by Success
Member since Sep 2015
2002 posts
Posted on 11/19/26 at 6:02 pm to
I agree. I’m saying if it’s tied like that pic it’s not moving. If it is moving, it’s not tied like that. And if his elevation is all over the place, it’s likely his timing.
Posted by Jack Daniel
Gold member
Member since Feb 2013
30173 posts
Posted on 11/19/26 at 6:04 pm to
quote:

if his elevation is all over the place, it’s likely his timing.

His elevation is all over the place because his anchor point (peep) is all over the place.
Posted by Success
Member since Sep 2015
2002 posts
Posted on 11/19/26 at 6:10 pm to
Man I completely understand the issue. I’m offering a differential for the next dude whose elevation is all over the place and his peep is epoxied in place.
Posted by AlxTgr
Kyre Banorg
Member since Oct 2003
88682 posts
Posted on 11/19/26 at 8:17 pm to
I don't miss using a peep.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

Facebook•X•Instagram