- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message

Vinyl pool liner replacement Lafayette
Posted on 2/16/18 at 8:49 am
Posted on 2/16/18 at 8:49 am
I know...vinyl liners are trashy. But I need to get mine replaced before summer. Has anyone in the Lafayette area had one replaced recently and if so could you give me a ballpark figure of what it cost?
I've gotten 2 quotes and they seem a little high.
I've gotten 2 quotes and they seem a little high.
Posted on 2/16/18 at 8:50 am to REB BEER
Fill it in and plant a garden
Posted on 2/16/18 at 8:52 am to REB BEER
Just get some Mexicans. They'll do it for a case of bud light.
Posted on 2/16/18 at 9:13 am to brucevilanch
I was flabbergasted
Posted on 2/16/18 at 9:14 am to REB BEER
quote:
One of the quotes I got WAS from some Mexicans and they were 20% higher than the Americans.
Must have been dreamers.
Posted on 2/16/18 at 9:15 am to geaux4a
Wish I had a pool with vinyl liner.
Posted on 2/16/18 at 9:17 am to REB BEER
A guy I worked with found the correct liner online for his pool and did it himself.
Posted on 2/16/18 at 9:28 am to REB BEER
Are you talking about an above ground pool? If you are then it's not that hard to replace it. Just make sure the bottom is level and smooth and work the wrinkles out with your feet as it slowly fills up with water. Then put your skimmer plate on and cut out hole with a razor knife, the same for the return.
It's basically the same process for an inground vinyl liner but if you have an above ground sunk in the ground then you have to worry about the walls collapsing after its drained.
It's basically the same process for an inground vinyl liner but if you have an above ground sunk in the ground then you have to worry about the walls collapsing after its drained.
Posted on 2/16/18 at 9:50 am to Brazos
It's an inground. I've watched the videos on how to do it and it doesn't look too difficult, but I'm sure there are a few tricks of the trade that a novice like myself don't know.
Posted on 2/16/18 at 9:52 am to REB BEER
quote:and?
I've gotten 2 quotes and they seem a little high.
Posted on 2/16/18 at 9:53 am to REB BEER
quote:How much was your quotes?
It's an inground. I've watched the videos on how to do it and it doesn't look too difficult, but I'm sure there are a few tricks of the trade that a novice like myself don't know.
Posted on 2/16/18 at 11:34 am to REB BEER
The hardest part is the wrinkles. Ive done quite a few above ground liners and the trick is working them out with your feet with a few inches of water in the pool. Finding the exact size liner might be difficult if it's a custom shape.
On that 5500 quote how much of that is the liner? The price varies on liners due to gauge and pattern. If you get a plain blue one it's going to be cheaper.
On that 5500 quote how much of that is the liner? The price varies on liners due to gauge and pattern. If you get a plain blue one it's going to be cheaper.
This post was edited on 2/16/18 at 11:38 am
Posted on 2/16/18 at 11:55 am to REB BEER
You might want to check into an ECOFINISH vs a liner.
I also have a vinyl liner in ground pool and thinking about going this direction.
Pierce Fiberglass in New Iberia LA
I also have a vinyl liner in ground pool and thinking about going this direction.
Pierce Fiberglass in New Iberia LA
Posted on 2/16/18 at 12:18 pm to REB BEER
quote:
I know...vinyl liners are trashy.
But they make a lot of sense in south LA where the effect of constantly changing soil conditions wreck a lot of gunite pools.
Posted on 2/16/18 at 10:49 pm to REB BEER
Had my 16 X 32 done last summer. Local pool company in Pensacola. $3,200.00 complete... turnkey. Liner was $950.00 + $2250 labor
Popular
Back to top

10









