Started By
Message

re: trouble getting clothes clean in your h.e. washing machine?

Posted on 8/30/18 at 6:05 am to
Posted by MrSmith65
Member since Apr 2018
959 posts
Posted on 8/30/18 at 6:05 am to
The HE's don't use enough water to get clothes clean.
Posted by udtiger
Over your left shoulder
Member since Nov 2006
117132 posts
Posted on 8/30/18 at 6:06 am to
The people that came up with the "high efficiency" washer deserves to share the same spot in Hell with the inventor of the "low flow" toilet.
Posted by MrSmith65
Member since Apr 2018
959 posts
Posted on 8/30/18 at 6:07 am to
Yep. Not enough water in either...
Posted by Y.A. Tittle
Member since Sep 2003
111638 posts
Posted on 8/30/18 at 6:23 am to
quote:


The people that came up with the "high efficiency" washer deserves to share the same spot in Hell with the inventor of the "low flow" toilet.




Both are the result of misguided government regulation.
Posted by Bullfrog
Running Through the Wet Grass
Member since Jul 2010
61789 posts
Posted on 8/30/18 at 6:56 am to
I can’t even.

Y’all must be one major stinky arse family. Toe jam, armpit and collar stains that a single wash can’t get out leads me to believe y’all gotta a bunch of B. O. and lifestyle issues that need addressing first.

Maybe cut back on the garlic and stinky cheeses.
Posted by AFistfulof$
New Orleans
Member since Jan 2013
1028 posts
Posted on 8/30/18 at 7:02 am to
He sounds like a disgusting dirty smelly arse person
Posted by Bullfrog
Running Through the Wet Grass
Member since Jul 2010
61789 posts
Posted on 8/30/18 at 7:15 am to
Surprised no one is making a snap-in agitator for these HE washers. Hmmmmmmm......
Posted by Tigerhead
Member since Aug 2004
1176 posts
Posted on 8/30/18 at 8:01 am to
I have a high capacity Kenmore HE washer and it cleans our lightly soiled clothes perfectly in the HE mode.

If we have heavily soiled clothes, or something really big, like a comforter or something, we set it on "Deep Fill" and it cleans like a champ. We use a good quality liquid detergent and we fill (instructions say to leave 1 hand width of space at the top of the tub) but don't stuff the tub. No issues in 8 years and very pleased with performance.

Forgot to add that, without the agitator, we never have any damage to clothes. Not that our old agitator washer ate our clothes every day, but occasionally we would get something wound around the agitator.
This post was edited on 8/30/18 at 8:05 am
Posted by crash1211
Houma
Member since May 2008
3772 posts
Posted on 8/30/18 at 8:23 am to
quote:

The people that came up with the "high efficiency" washer deserves to share the same spot in Hell with the inventor of the "low flow" toilet.

Don't forget the person who came up with the spring loaded vent thing for those new plastic gas cans. I swear I spill more gas on one pour than I ever did with all the old hole on the top of the tank vents i've ever owned combined.
Posted by The Last Coco
On the water
Member since Mar 2009
7001 posts
Posted on 8/30/18 at 8:41 am to
quote:

Don't forget the person who came up with the spring loaded vent thing for those new plastic gas cans. I swear I spill more gas on one pour than I ever did with all the old hole on the top of the tank vents i've ever owned combined.

This just sounds like user error.

I don't like the spring vent on gas cans either, but I also don't spill it everywhere.
Posted by BigB0882
Baton Rouge
Member since Nov 2014
5422 posts
Posted on 8/30/18 at 8:47 am to
I feel your pain. I also have a major issue with my washing machine going uneven during the spin cycle. It doesn't matter if it is a small load or large load, happens almost every time. They can't find a problem. I honestly want the thing to just bite it so I can buy a new one. I will never get this kind again.
Posted by crash1211
Houma
Member since May 2008
3772 posts
Posted on 8/30/18 at 9:03 am to
That's horseshite. It leaks and it ain't user error baw.
Posted by KG6
Member since Aug 2009
10920 posts
Posted on 8/30/18 at 9:25 am to
quote:

I have a high capacity Kenmore HE washer and it cleans our lightly soiled clothes perfectly in the HE mode. If we have heavily soiled clothes, or something really big, like a comforter or something, we set it on "Deep Fill" and it cleans like a champ. We use a good quality liquid detergent and we fill (instructions say to leave 1 hand width of space at the top of the tub) but don't stuff the tub. No issues in 8 years and very pleased with performance. Forgot to add that, without the agitator, we never have any damage to clothes. Not that our old agitator washer ate our clothes every day, but occasionally we would get something wound around the agitator.



Same experience. Never gotten clothes that were still dirty. If we have a load I'm worried about, we put it on the extra water cycle.

I rotate about 8-10 dress shirts for work. I've noticed that the shirts last much longer without the agitator. They always lasted a long time, but after a bunch of washes in the old machine, you'd get some fraying, etc.. Never have that issue now. And it's so much easier to unload.

I can see that a really dirty load might get cleaned better with the agitator, but it's just not enough of an issue to overcome the things we like about the HE.

Posted by bfniii
Member since Nov 2005
17840 posts
Posted on 8/30/18 at 9:51 am to
quote:

buy a pre-2007 whirlpool/kenmore made direct drive washer
i just checked and was surprised to find that there are still non he washers available. we will definitely be looking to buy one of those next time.

otherwise, our machine operates really well. we've had no trouble out of it at all. it's just the h.e. nature of the machine that necessitates the loads being much smaller and the documentation doesn't tell you that.

and the snap in agitator, i would definitely think about buying one of those. i can manually adjust the water level for the cycles to match a larger load.
Posted by Napoleon
Kenna
Member since Dec 2007
74875 posts
Posted on 8/30/18 at 10:59 am to
Not even speed queen does anymore.
Posted by cahoots
Member since Jan 2009
9134 posts
Posted on 8/30/18 at 11:15 am to
(no message)
This post was edited on 1/21/20 at 9:22 am
Posted by LSU2001
Cut Off, La.
Member since Nov 2007
2388 posts
Posted on 8/30/18 at 11:23 am to
I have a front load HE washer and was having all kinds of issues with clothes and esp. towels retaining a mildew type smell. The clothes and towels looked clean but if after washing and drying they even slightly damp (sweat, drying off etc) they would smell like mildew. I tried everything I could find to try from cleaning the machine with the HE cleaning kit from Tide, to washing everything on the heavy duty cycle to changing detergents several times.

I finally cured the problem by making my own detergent with the following ingredients:

1 bar of Fels-naptha grated or 1 cup of Zote soap flakes.
1 cup of borax
1 cup of arm & hammer washing soda (not baking soda)
1 cup of clorox II

Heat a pot with 1 gallon of water, dissolve the soap in the water until completely dissolved.
Add in one cup of borax and 1 cup of washing soda to the soap water mixture.
then stir until dissolved. may take a few minutes and it may not completely dissolve, that's ok.
Add water, borax, and soda mixture to 3 gallons of warm water and stir well. Let cool to room temp and then add 1 cup of Chlorox II and stir well.

I use a clean 5 gallon bucket with a screw type lid to mix and hold my detergent.

So now you have 4 gallons of really good detergent that cost about 2-3 cents per load.

I also started using pure white vinegar as a fabric softener and all of my clothes and towels come out soft and very clean smelling. If you absolutely have to have some type of scent in your laundry then add a few drops of your favorite essential oil to the finished detergent.

I find this works much better to clean my clothes and to make them smell clean. I do not find it necessary to use any commercial fabric softener because I like the smell of the laundry without the perfumes etc.

It works for me and I don't have the issue with clothes smelling nor my washer smelling any longer.
This post was edited on 8/30/18 at 11:25 am
Posted by alphaandomega
Tuscaloosa-Here to Serve
Member since Aug 2012
17361 posts
Posted on 8/30/18 at 12:12 pm to
quote:

The people that came up with the "high efficiency" washer deserves to share the same spot in Hell with the inventor of the "low flow" toilet.




Exactly this ^^^^^

When I remodeled my house a few years ago my plumber remarked that the low flow toilets were the worst design he had ever seen. He also mentioned that there is the same amount of water on Earth that there was a million years ago. The water from my toilet goes to a sewage treatment plant then goes to a river. Downstream the river water is processed again and used by those people, their sewage is treated and released to be used again downstream.


Water does not disappear. Its like "save a tree" bullshite. Trees for paper products are grown for that purpose, it is not like loggers are cutting old growth timber to make copier paper. Trees are like row crops they just take longer to mature.

And dont get me started on plastic straws.
Posted by Benne Wafer
Member since Jan 2015
469 posts
Posted on 8/30/18 at 1:06 pm to
You aren't making detergent, you are making laundry soap. Nothing wrong with it if you are using a washing board, using a machine requires detergents that uses chemical reactions to break down dirt and oils. And your clothes are not getting clean no matter what you think. Gross pictures of "clean" clothes washed in homemade "detergent".

Have had two sets of HE front loaders for over ten years now and feel our clothes have gotten just as clean as they did in the top loaders with agitators. Never had an issue with mildew even though we don't keep the door open in between uses. The only time our clothes smell musty is when a baby sock got stuck in the filter or we forgot and left wet clothes in washer overnight.
Posted by I B Freeman
Member since Oct 2009
27843 posts
Posted on 9/15/18 at 10:37 pm to
I bought a SQ TR 5 today

I don’t like it. Even though it has knobs they are really digital controls and I HATE digital controls on appliances. I had to unplug it three times today to “reset” the panal. Dealer is coming out next week to check it out. (I had an over that needed a circuit board after a month.)

They changed how it operates too. It is very quiet but I am not sure about the new process. Also the lid locks and that causes some issues.

I want to friggin turn it on, load the clothes and then take them out and put them in the dryer. I don’t need auto fill options, water sensors etc.

Wouldn’t buy it again but may not insist the dealer take it back Monday. I feel sorry for them. It does have a five year warranty.
This post was edited on 9/15/18 at 10:44 pm
first pageprev pagePage 2 of 2Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram