3
- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Whole Home Water Filter
Posted on 9/3/26 at 7:11 pm
Posted on 9/3/26 at 7:11 pm
Need recommendations on a DIY 3-stage whole home water filtration system.
Considering the Express Water Essential model. Anyone with experience with this one?
Are the Lowe’s/Home Depot brands reliable? Any others?
Considering the Express Water Essential model. Anyone with experience with this one?
Are the Lowe’s/Home Depot brands reliable? Any others?
Posted on 9/4/26 at 8:04 am to TeauxJeaux
LINKI installed an iSpring system about 2 years ago. Depending on what you’re looking for, the filter combinations can be configured to your preference.
I also installed an inline sediment filter before the main filter manifold. Just a little cheap one from Amazon with a brass housing and a cleanout 90° switch on the bottom.
I also jumped a ground wire around the manifold in the case something was grounded on one of my older pipes that I didn’t know about.
It was a super easy install. I ended up using a pro press for all the fittings. Also make sure to add a bypass with shutoffs before and after the manifold.
I also installed an inline sediment filter before the main filter manifold. Just a little cheap one from Amazon with a brass housing and a cleanout 90° switch on the bottom.
I also jumped a ground wire around the manifold in the case something was grounded on one of my older pipes that I didn’t know about.
It was a super easy install. I ended up using a pro press for all the fittings. Also make sure to add a bypass with shutoffs before and after the manifold.
This post was edited on 9/4/26 at 8:05 am
Posted on 9/4/26 at 10:47 pm to PaBon
how often do you have to change the filters? Ive been wanting to do this for a while
Posted on 9/5/26 at 8:06 am to TeauxJeaux
Something wrong with BR water we need to know about?
Posted on 9/5/26 at 9:22 am to UptownJoeBrown
I'm fortunate enough to be in a water system fed by one of the purest aquifers in the country. Their annual water reports are damn near perfect.
Posted on 9/5/26 at 11:37 am to TeauxJeaux
I second ispring.
Did the whole install diy with a 50 micron sediment filter upstream of the filter.
I have pressure gauges on either side of the setup. Change filters about 1x every 6-8 month when the pressure drops too far.
I did the whole install with pex B and crimp fittings in less than 3 hours.
Works great. The amount of dirt/mud that gets caught is disgusting. Water tastes better too.
Did the whole install diy with a 50 micron sediment filter upstream of the filter.
I have pressure gauges on either side of the setup. Change filters about 1x every 6-8 month when the pressure drops too far.
I did the whole install with pex B and crimp fittings in less than 3 hours.
Works great. The amount of dirt/mud that gets caught is disgusting. Water tastes better too.
Posted on 9/5/26 at 7:20 pm to Megasaurus
I believe the suggested time is 6mo. If you do the large sediment filter as one of the options on the 3 filter main manifold system, you can most probably leave that one for a while. It’s huge. The other 2 filters are your choice that you can pick from.
I would suggest getting a water test if your existing to see where you are before making the filter decision.
I would suggest getting a water test if your existing to see where you are before making the filter decision.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News