- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Anyone built their own smoker?
Posted on 11/7/25 at 12:20 pm to MrBobDobalina
Posted on 11/7/25 at 12:20 pm to MrBobDobalina
quote:
Where did you source your barrel? I'm interested in making one of my own
Craigslist. Some guy was selling them for $15/ea.
1
Posted on 11/7/25 at 2:01 pm to BottomlandBrew
quote:single pane of thick shower glass; roughly 8x4 (floor to ceiling) in bathroom remodel. what am i look at roughly and how long?
BottomlandBrew
going with no door, all tile floor & walls; just a divider for the shower you can walk into. i assume i would have to wait & get final measurement once the tile is in.
also, what do you think of this idea?
Posted on 11/7/25 at 3:45 pm to CAD703X
See below. That's an installed number.
Tile needs to be installed to measure.
Current lead time is about 3 weeks from time of final measurements.
As for the idea, we do it a lot. It's not my cup of tea as it can get a little chilly in the shower. We've gone back on several to add doors after the homeowner used them and got cold/water everywhere.
Sorry for the hijack, OP. Don't kill me Chicken for trying to hustle and make a sale. I got kids to feed.
Tile needs to be installed to measure.
Current lead time is about 3 weeks from time of final measurements.
As for the idea, we do it a lot. It's not my cup of tea as it can get a little chilly in the shower. We've gone back on several to add doors after the homeowner used them and got cold/water everywhere.
Sorry for the hijack, OP. Don't kill me Chicken for trying to hustle and make a sale. I got kids to feed.
Posted on 11/7/25 at 3:56 pm to BottomlandBrew
quote:
Don't kill me Chicken for trying to hustle and make a sale. I got kids to feed.
quote:
Current lead time is about 3 weeks from time of final measurements.
ok i'll let you know; we are at the demo phase; need to get the tile and fixtures in.
good point about being cold. hmm, i wonder if a whole-room heater might help. its a very small space.
Posted on 11/7/25 at 6:03 pm to jmh5724
Finished it today. Still have to hunt down some flashing for the bottom half but I decided to light it up anyway. I’ll probably do a couple burns in it to season the inside before I put some meat in it.
Posted on 11/8/25 at 11:19 am to jmh5724
Wow!
Posted on 11/10/25 at 1:36 pm to CAD703X
I’ve thought about using an old fridge with freezer on top turned upside down. Then adding a hot plate or fire box in the freezer part. Just an idea.
Posted on 11/10/25 at 5:40 pm to mikie421
That probably wouldn't be bad for cold smoking, but I'd be hesitant to use it to actually cook food in due to all the plastic crap lining the fridge/freezer.
Unless you plan on gutting it and just using the metal shell.
Unless you plan on gutting it and just using the metal shell.
Page 2 of 2
Popular
Back to top
Follow TigerDroppings for LSU Football News