- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Bending loft on irons
Posted on 6/22/18 at 5:05 pm
Posted on 6/22/18 at 5:05 pm
Anyone ever have a club bent to a different loft?
6
Posted on 6/22/18 at 5:21 pm to Big_Al_316
Just a wedge.
Posted on 6/22/18 at 6:39 pm to Big_Al_316
My last set of irons the lifts on a couple of irons were off so I had them bent back.
FYI you can only bend forged clubs.
FYI you can only bend forged clubs.
Posted on 6/22/18 at 7:44 pm to Big_Al_316
Bumped my putter up 1 degree. Gets it up and rolling smoother on the greens down here.
Posted on 6/22/18 at 8:04 pm to Big_Al_316
I’ve messed with the loft on a wedge for gapping purposes and had my utility 2 iron bent 2* to get a little more height.
All my irons are bent 2* flat in lie angle as well.
All my irons are bent 2* flat in lie angle as well.
Posted on 6/22/18 at 9:20 pm to Big_Al_316
Depends on the type of irons you play. Wedges are easier to bend. I've bent a few long irons before, but they were blades.
The toughest ones I've ever bent were the Calaways because the hozel is short.
Also, you can go a few degrees, but much.more than that and you need to buy a new club
The toughest ones I've ever bent were the Calaways because the hozel is short.
Also, you can go a few degrees, but much.more than that and you need to buy a new club
Posted on 6/22/18 at 9:46 pm to Big_Al_316
All my wedges are bent 1.5* strong to get rid of 1.5* of bounce. Can’t stand a lot of bounce. Want my wedges to sit flat on the ground
Posted on 6/22/18 at 10:46 pm to Random LSU Hero
Why don't you just order them with low bounce? Or do you already get like 4 degrees and bend them more? You must play on a lot of hard pan.
Posted on 6/23/18 at 5:40 am to CoachChappy
quote:
you can only bend forged clubs.
Incorrect. My Vokey wedges are all bent 2 degrees strong, not forged. Ping irons can be bent as well, not forged.
Posted on 6/23/18 at 6:59 am to medtiger
quote:
Why don't you just order them with low bounce? Or do you already get like 4 degrees and bend them more? You must play on a lot of hard pan.
The Mack daddy Forged had limited bounce options. I think my 60 has 8*. I wanted a little less. Courses vary, from Dumas to Greystone to Fennwood to CCL.
This post was edited on 6/23/18 at 7:01 am
Posted on 6/23/18 at 10:13 pm to Random LSU Hero
Went ahead and had my Cleveland 60*bent to 62.5*. Gonna go out tomorrow and see how it plays. Didn’t really have any money in it so if it screws up not a big deal
Page 1 of 1
Back to top
Follow TigerDroppings for LSU Football News