- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Ubiquiti G4 Pro and Protect Config
Posted on 6/15/21 at 12:18 pm to BabySam
Posted on 6/15/21 at 12:18 pm to BabySam
quote:Pretty sure all the Ubiquiti bullet mounts have only 2 screws, so I think Doc's question is can you get both screws in wood and offset the mount enough to still allow the cable to pass through.
i made sure to find the 2x4s in the soffit to get 2 of 3 screws in for each mount.
1
Posted on 6/15/21 at 1:06 pm to Korkstand
quote:
Pretty sure all the Ubiquiti bullet mounts have only 2 screws, so I think Doc's question is can you get both screws in wood and offset the mount enough to still allow the cable to pass through.
yeah, thoughts in my brain didn't make it to the post...but info you had on both posts seems totally accurate.
a terminated cable will passthrough the area in mount and into the camera compartment. ask me how i know, well i pulled cable through and terminated, then had to back it out to add the piece of scrap wood, then run it back through again. so should be just fine...lol
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News