- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Sliding Miter Saw. 7 1/4”. Should I even bother?
Posted on 7/22/20 at 8:08 am to LSU alum wannabe
Posted on 7/22/20 at 8:08 am to LSU alum wannabe
i have the kobalt one. it is limiting to what you can cut but honestly it does 99% of what i need. it will rip a 2x10 but not a 2x12 and will not cut a 4x4 in one cut either if that helps.
2
Posted on 7/22/20 at 8:22 am to bayou choupique
It does help. That’s what i thought
Posted on 7/22/20 at 9:08 am to bayou choupique
quote:
it is limiting to what you can cut but honestly it does 99% of what i need. it will rip a 2x10 but not a 2x12 and will not cut a 4x4 in one cut either if that helps.
If you’re just using it as a chop saw, it likely has enough capacity for most cuts.
Where it really starts to become obvious, especially if non-sliding, is the miters. Also if you needed to cut trim/molding the larger size is much more useful.
I’m a big proponent of buy once.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News