- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Someone Asked Why Aren’t CPAP Machines Being Used As Ventilators
Posted on 3/26/20 at 8:41 pm to Trevaylin
Posted on 3/26/20 at 8:41 pm to Trevaylin
quote:
read a pretty good article on this topic yesterday. Cpap's usually operate with a discharge pressure up to 19 inches of water,
Stopped reading right there! Somebody is trying inflate a semi-truck tire?
Posted on 3/26/20 at 8:42 pm to auggie
quote:
When they talk about retro fitting machines, they are basically adding the controls required to perform those functions.
It's going to take more than a firmware update. By the time they figure it out we will have it under control.
Posted on 3/26/20 at 8:45 pm to LuckyTiger
A CPAP is not a vent, completely different systems. However, below is all you need, plus some high flow O2. May need a schedule for breaks. Just squeeze 8-10 per min.
Posted on 3/26/20 at 8:48 pm to DMAN1968
quote:
Can you repair that?
Yes, if I have the parts available.
All of these controls are pretty much the same as every robot or CNC machine at every factory in America. They all are controlled by computers and PLC, Program Logic Control.
Posted on 3/26/20 at 8:49 pm to Mfdtiger
quote:
A CPAP is not a vent, completely different systems. However, below is all you need, plus some high flow O2. May need a schedule for breaks. Just squeeze 8-10 per min.
About the longest I've had to do that on a patient was around an hour. This particular patient had my hands cramping up in about 45 minutes...arms were sore for a few days.
Posted on 3/26/20 at 8:50 pm to Mfdtiger
quote:
Mfdtiger
Thanks for the PTSD! Wore thru gloves, and ended up with blisters on my fingers!
Posted on 3/26/20 at 8:51 pm to auggie
quote:
Yes, if I have the parts available.
All of these controls are pretty much the same as every robot or CNC machine at every factory in America. They all are controlled by computers and PLC, Program Logic Control.
You can't just plug in the ODBII scanner to point out the problem on these machines. Also, you don't just zip down to AutoZone for some new parts. It's not the same.
Posted on 3/26/20 at 8:52 pm to DMAN1968
Done it plenty of times, but if it’s my family member and no vent. We will set up a rotation.
Posted on 3/26/20 at 8:52 pm to auggie
quote:
Yes, if I have the parts available.
All of these controls are pretty much the same as every robot or CNC machine at every factory in America. They all are controlled by computers and PLC, Program Logic Control.
Dang Tesla, I think you've found a new business venture! Converting CPAPs into ventilators!
Posted on 3/26/20 at 8:54 pm to greygoose
quote:
Stopped reading right there! Somebody is trying inflate a semi-truck tire?
Yeah, I almost jumped into this discussion but it would just annoy me.
Posted on 3/26/20 at 8:56 pm to DMAN1968
quote:
About the longest I've had to do that on a patient was around an hour. This particular patient had my hands cramping up in about 45 minutes...arms were sore for a few days.
Rotated with a male nurse in the ER one night on a nursing home patient brought in by ambulance. Had a DNR, but the young grandson said "Do all you can". Broke about 3-4 ribs doing CPR, bagging was the "break". Still wore thru gloves and had blisters on my fingers.
Posted on 3/26/20 at 8:59 pm to greygoose
quote:
Dang Tesla, I think you've found a new business venture! Converting CPAPs into ventilators!
No thanks, there are plenty of other people who can do that. It's not even hard. Any maintenance man who knows PLC and air controls for feeding, clamping, switching, on an automated assembly line can do that.
Posted on 3/26/20 at 9:01 pm to greygoose
quote:
Had a DNR, but the young grandson said "Do all you can".
Need to make these kind of people come in the room and do the first compression...so they can feel and hear the ribs break. I hate those people.
Posted on 3/26/20 at 9:05 pm to DMAN1968
quote:
Need to make these kind of people come in the room and do the first compression...so they can feel and hear the ribs break. I hate those people.
Nothing quite like doing CPR on a 90 y/o, 89 lb woman.
Posted on 3/26/20 at 9:06 pm to DMAN1968
quote:
You can't just plug in the ODBII scanner to point out the problem on these machines. Also, you don't just zip down to AutoZone for some new parts. It's not the same.
I guess, you aren't familiar with Grainger?
I would think the medical facility would keep parts on hand? If not, then they are idiots.
Posted on 3/26/20 at 9:09 pm to auggie
quote:
No thanks, there are plenty of other people who can do that. It's not even hard. Any maintenance man who knows PLC and air controls for feeding, clamping, switching, on an automated assembly line can do that.
Make sense. I guess that's why all those HVAC repairmen should supplant all those MDs with Bio-Med engineering degrees. Maybe healthcare costs will go down?
Posted on 3/26/20 at 9:12 pm to auggie
quote:
I guess, you aren't familiar with Grainger?
I would think the medical facility would keep parts on hand? If not, then they are idiots.
Damn! I feed the troll! You got me. Good one!
Posted on 3/26/20 at 9:17 pm to greygoose
quote:
Make sense. I guess that's why all those HVAC repairmen should supplant all those MDs with Bio-Med engineering degrees. Maybe healthcare costs will go down?
One thing is for sure, if those bio-med types can convince you, that they are the only people who can figure how to perform a simple function, it's going to cost you dearly. They are going to make sure of it. Why do you think ventilators cost so much? Do you really believe, they are some type of genius machine?
Posted on 3/26/20 at 9:27 pm to SSpaniel
It’s super dangerous for the staff caring for people that have COVID to be on Bipap or C-PAP. The secretions are aerosolized and blown throughout the room with the masks. Not a good idea unless you want a bunch of sick care givers. I’m ashamed of our countries PPE supply. I’ve never had so many difficult conversations with my staff about why they need to put themselves at risk to go care for people bc we as a country were shite planners
This post was edited on 3/26/20 at 9:29 pm
Posted on 3/26/20 at 9:31 pm to Mrtommorrow1987
quote:
It’s super dangerous for the staff caring for people that have COVID to be on Bipap or C-PAP. The secretions are aerosolized and blown throughout the room with the masks. Not a good idea unless you want a bunch of sick care givers. I’m ashamed of our countries PPE supply. I’ve never had so many difficult conversations with my staff about why they need to put themselves at risk to go care for people bc we as a country were shite planners
So riddle me this, you have a 50 y/o patient with sleep apnea. History of heart disease and high blood pressure. You deny the use of CPAP while he sleeps?
Popular
Back to top
Follow TigerDroppings for LSU Football News