- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Ranger EV or Electrician Guru's
Posted on 12/29/19 at 10:00 pm
Posted on 12/29/19 at 10:00 pm
Charged it up and noticed the below. This was also the first time I just left it plugged up over night. I checked all the wiring under the hood where the charger is. All was tight.
[/url]
[url=LINK ]
[/url]
Anyone have an idea?
[/url] [url=LINK ]
[/url] Anyone have an idea?
Posted on 12/29/19 at 10:11 pm to ChandlerB03
Prong loose in the plug causing an arc?
I've seen that before but never studied on it. That's my best guess
I've seen that before but never studied on it. That's my best guess
Posted on 12/29/19 at 10:28 pm to DownshiftAndFloorIt
Yeah I'd guess a loose prong causing high resistance connection. Or probably not a loose prong per say but the spring connection inside the female end of extension cord.
loose electrical connection=high resistance=heat
loose electrical connection=high resistance=heat
Posted on 12/29/19 at 10:41 pm to Chuker
Ill check that out and replace the end. Went ahead and plugged it up tonight with a different cord to see if it does the same thing
Posted on 12/29/19 at 11:10 pm to ChandlerB03
I bet most anything with a different extension cord you'll be good. Hopefully the male end on your Ranger is still OK. I've got a 12ga extension cord that I need to replace the end on because if something draws power on it for an extended amount of time, the whole plug end will get quite hot.
Its the same reason that cheap contractor grade electrical receptacles inside a home can cause fires. Over time the flimsy contact springs inside the outlet get weak leading to a poor/high resistance connection.
Its the same reason that cheap contractor grade electrical receptacles inside a home can cause fires. Over time the flimsy contact springs inside the outlet get weak leading to a poor/high resistance connection.
Posted on 12/30/19 at 6:56 am to ChandlerB03
Go to an electrical supply house and buy a Woodhead 1447 and 1547, install properly, and don't worry about it again
Posted on 12/30/19 at 7:32 am to ChandlerB03
need to amp probe the wire from the plug to the batteries. Could be corrosion issue at the batteries and even under the wire conduit.
Posted on 12/30/19 at 8:07 am to ChandlerB03
How long of an extension cord is that one with the burnt connector?
Popular
Back to top
4





