Started By
Message

Can you re-use grips? *UPDATE*

Posted on 8/9/19 at 7:36 pm
Posted by Schmelly
Member since Jan 2014
14521 posts
Posted on 8/9/19 at 7:36 pm
I’m about to regrip a bunch of my clubs and the grips I’m replacing are almost brand new. Is there anyway to save them? Heat them up or something? Hate to just slice them off

UPDATE:
So I used a metal coat hanger. Folded it in half so the end was rounded. Got under the grip with it and worked it around til I could get it 2-3 inches in. Then I started putting some of the solutions in and got I further down. Just kept doing that until I got the tape to fully release. Lil elbow grease. Not too bad. Took me about 30-40 minutes to get 10 grips off
This post was edited on 8/13/19 at 9:43 pm
Posted by ChrisBurky
Hill Valley, California
Member since Jul 2009
670 posts
Posted on 8/9/19 at 8:02 pm to
Yes they can be blown off with air
Posted by nobigdeal69
baton rouge
Member since Nov 2009
2178 posts
Posted on 8/9/19 at 11:25 pm to
quote:

Yes they can be blown off with air


You can only blow them off if they were installed using rubber cement, which is pretty unusual these days. If they were installed with double sided tape and solvent, you can still save them by injecting some solvent into the grip, but it’s a PITA.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram