Started By
Message

re: Router recommendations to not have shitty internet

Posted on 11/26/18 at 5:24 pm to
Posted by rintintin
Life is Life
Member since Nov 2008
16196 posts
Posted on 11/26/18 at 5:24 pm to
quote:

Have you tried splitting 2.4ghz bands and 5ghz bands then putting each on a frequency that doesn't have much interference from other neighboring networks?


Is this a difficult process?

I'm not necessarily tech savvy, but pretty good at figuring things out.
Posted by Hopeful Doc
Member since Sep 2010
15004 posts
Posted on 11/26/18 at 9:06 pm to
Give me your current router make and model.


Usually it's a matter of a handful of drop-down menus. I'll read up and see if I can find a guide and if not try to walk you through it


Some can't do it at alto start without further help, Google "my router (but your make/model) set 2.4ghz channel"
Set the 2.4ghz to 20mHz band on 1, 6, or 11.

Set the 5ghz band to a width of 80. In a house, you likely can choose anything but can play around with it and speed test, speedtest, speed test until you find the fastest one


Probably easier than describing how to do a scan which your hardware may or may not support.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram