- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Washer quit draining
Posted on 12/7/17 at 12:44 pm to CAD703X
Posted on 12/7/17 at 12:44 pm to CAD703X
Huh?
The agitator is attached to the transmission, if that's stuck you have much bigger problems.
On your maytag it's one or two belts and a mechanical pump.
On a whirlpool(pre2010) it's a pump on the motor.
Post 2010 pretty much everyone has an electric pump.
Pumps are cheap.
Fwiw the LG electric drain pump works on ALL washers that use 110v at the pump and have a split design.
I usually pay $49 per motor.
The agitator is attached to the transmission, if that's stuck you have much bigger problems.
On your maytag it's one or two belts and a mechanical pump.
On a whirlpool(pre2010) it's a pump on the motor.
Post 2010 pretty much everyone has an electric pump.
Pumps are cheap.
Fwiw the LG electric drain pump works on ALL washers that use 110v at the pump and have a split design.
I usually pay $49 per motor.
This post was edited on 12/7/17 at 12:49 pm
1
Posted on 12/7/17 at 1:44 pm to Napoleon
My Maytag tranny froze up. 
would spin but not agitate because the clutch was stuck.
I sadly tossed the set and grabbed a 2003 Sears/Whirlpool direct drive for $50. They were practically giving them away because they didn't realize all they needed was a $15 bushing or whatever that little plastic piece is called that wears out so the agitator won't turn.
Between that and a $5 bottle of touch up enamel I haven't had a single issue.
would spin but not agitate because the clutch was stuck. I sadly tossed the set and grabbed a 2003 Sears/Whirlpool direct drive for $50. They were practically giving them away because they didn't realize all they needed was a $15 bushing or whatever that little plastic piece is called that wears out so the agitator won't turn.
Between that and a $5 bottle of touch up enamel I haven't had a single issue.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News