- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Trying my own European mount - Advice
Posted on 1/29/17 at 7:48 am
Posted on 1/29/17 at 7:48 am
Never tried anything like this before and don't know where to start.
I got a pot to boil it in and that's where I'm at now.
Deer was shot Friday. Head as been bagged and in deep freeze since then.
How long do I wait? What prep work? What do I boil it in for how long? Is this a multiple day thing or can be knocked out in a weekend? Basically I need a step by step
I got a pot to boil it in and that's where I'm at now.
Deer was shot Friday. Head as been bagged and in deep freeze since then.
How long do I wait? What prep work? What do I boil it in for how long? Is this a multiple day thing or can be knocked out in a weekend? Basically I need a step by step

This post was edited on 1/29/17 at 8:03 am
Posted on 1/29/17 at 8:06 am to SeaPickle
Clean the shite out of it beforehand, and if it's a head shot it's not gonna work out. All I got 

Posted on 1/29/17 at 8:06 am to SeaPickle
Got one in an ant pile right now
Posted on 1/29/17 at 8:16 am to SeaPickle
It's a nasty smelling job
Posted on 1/29/17 at 8:20 am to Babewinkelman
I thought of the ant pile but the only ones I have aren't in my fence. They are behind it which connects to a 75 acre field filled with coyotes that would run off with the head.
Posted on 1/29/17 at 8:21 am to SeaPickle
Cover the head with a bucket and secure the bucket.
Posted on 1/29/17 at 8:27 am to SeaPickle
It's a long process. First thing is to get as much meat off as possible before boiling a pressure washer works well for getting meat off once it's boiled but it's messy you will have to get a stick or screwdriver and stir it in the brain cavity to get the brain out. Repeat several times. Will end up using a lot of propane
Also look up cold water maceration. Had a girl in a biology class and she worked in the museum she would preserve skulls for the museum and they came out awesome White as could be
never boiled them or anything
Here is a link
LINK
Also look up cold water maceration. Had a girl in a biology class and she worked in the museum she would preserve skulls for the museum and they came out awesome White as could be
never boiled them or anything
Here is a link
LINK
Posted on 1/29/17 at 8:28 am to SeaPickle
Make sure you use an old pot. You will never use it to cook in again.
Posted on 1/29/17 at 8:32 am to SeaPickle
I just did one and its pretty easy. Skin the head completely, take off any meat that you can get to. Put head in pot of water mixed with liquid soap (dawn) and a little bleach. Only put enough water to cover head to base of antlers. Bring pot to slow boil and boil for 2 hours.(slow simmering boil)
After 2 hours, take head out of pot and get your pressure washer. Wear gloves! Jaw will separate from skull. Should be loose meat and tongue visible. Remove by hand any visible loose meat. Tape or tie nose end of skull so nasal cavity doesn't break away. Secure head to a post or fence. Pressure wash skull completely. Concentrate on the holes to nasal cavity and brain. Use a screwdriver or wire to loosen material in skull. Pressure wash CLEAN and then let dry.
Go to beauty salon store and pick up a pint or quart of Peroxide. Lay skull in small pan and pour in peroxide. Using disposable brush, brush peroxide over full skull. Periodically brush and let sit for a day or so. Take out and let dry. Skull should be white and not smell.
Skinning and prep to boil, 1 hour. Boiling takes 2 hours. Clean up by hand and pressure washer, 30 minutes. Peroxide soak and brush, 2 days. If necessary, touch up horns with stain. Dry completely and mount.
After 2 hours, take head out of pot and get your pressure washer. Wear gloves! Jaw will separate from skull. Should be loose meat and tongue visible. Remove by hand any visible loose meat. Tape or tie nose end of skull so nasal cavity doesn't break away. Secure head to a post or fence. Pressure wash skull completely. Concentrate on the holes to nasal cavity and brain. Use a screwdriver or wire to loosen material in skull. Pressure wash CLEAN and then let dry.
Go to beauty salon store and pick up a pint or quart of Peroxide. Lay skull in small pan and pour in peroxide. Using disposable brush, brush peroxide over full skull. Periodically brush and let sit for a day or so. Take out and let dry. Skull should be white and not smell.
Skinning and prep to boil, 1 hour. Boiling takes 2 hours. Clean up by hand and pressure washer, 30 minutes. Peroxide soak and brush, 2 days. If necessary, touch up horns with stain. Dry completely and mount.
Posted on 1/29/17 at 8:32 am to SeaPickle
Just finished mine last weekend. First skin the whole head and de-meat as much as possible. Next cut the back of the skull/1st cervical vertebrae off where the spinal cord goes into the brain (this will give you access to remove the brain later.) then begin the boiling process. This should be hours of a LOW BOIL or just before boil heat and preferably outside bc it smells like arse. Then skin all the meat, eyes, and brain off with knives or delicately with a wood chisel. After this I use 30% peroxide to get remaining meat and flesh off by placing deer head in the original pot, dousing it, then using an old paint brush to continuously reapply to areas. Make sure not to get the peroxide on the antlers. When this is accomplished it should be meatless and off white. I like the bright white look so I taped off the antlers and spray painted with flat white spray paint. After dry, drill a hole in wood and into back of skull and use approximately a 3" screw to mount. Hope this helps!
Posted on 1/29/17 at 8:40 am to magicman534
I took all of the skin off and most of the meat prior to boiling. It smelled a little, but not that much. I think the key is taking the skin and most of meat off. I was surprised how easy it was to pressure wash off remainder after boiling. And, I only boiled for 2 hours.
Posted on 1/29/17 at 8:50 am to houlie41
Thanks for the tips. If i cant find an ant pile I'll probably leave it in the freezer until next weekend and give it a go.
Posted on 1/29/17 at 8:52 am to SeaPickle
Ive done a good bit over the past couple years, Ive found the easiest and best way is let it sit in a garbage bag for about a week and let it get to the point where everything kinda just slides off, then start cutting as much meat and hair off as you can, (it makes it way easier when the head is pretty much rotten, you just have to have a strong stomach) then start boiling it and pulling it out every 30-45 mins and scraping it, once you get done getting everything out soak it in peroxide over night so it doesnt make the bones brittle but dont let the horns get peroxide on them, let the skull sit in the sun for the day then repeat with the peroxide until you get the desired whiteness.
Also if the mouth bones and the bones on top of its snout fall off dont be too alarmed, you can sand down the edges some and glue them back in place like a puzzle.
Also if the mouth bones and the bones on top of its snout fall off dont be too alarmed, you can sand down the edges some and glue them back in place like a puzzle.
Posted on 1/29/17 at 9:44 am to SeaPickle
You don't need an ant pile. Just bury it with the horns sticking out the ground. Put a bucket over the horns and something heavy to secure the bucket. Takes a while though.
Posted on 1/29/17 at 9:55 am to SeaPickle
Someone downvoted every single post haha
Posted on 1/29/17 at 9:59 am to Chuckd
I assume bugs in the ground would eat it away?
I may bury it behind my fence with the bucket over it and ratchet the bucket to fence. I know there are tons of bugs and ants back there.
I may bury it behind my fence with the bucket over it and ratchet the bucket to fence. I know there are tons of bugs and ants back there.
This post was edited on 1/29/17 at 10:00 am
Posted on 1/29/17 at 10:40 am to SeaPickle
Forgot to mention, you need to pull off the lower jaw at some point as well
Posted on 1/29/17 at 2:50 pm to SeaPickle
Instead of putting it in the ground, skin out the head and soak it in a bucket of water with the antlers covered for about 3-4 weeks, changing the water about once a week. Spray with a hose to get whatever is remaining off the skull, then boil the skull for about 10-15 minutes to get the oil out of the bones (you should be able to tell once it's all boiled out). Finish it with a couple coats of peroxide cream if you want the nice white finish on it. If you don't boil the oil out, the skull will start turning brown/tan again over time.
If you prefer to do the all boiling method like others have suggested, know that the bones become very brittle and break easily, particularly the nose bone.
If you prefer to do the all boiling method like others have suggested, know that the bones become very brittle and break easily, particularly the nose bone.
Posted on 1/29/17 at 5:13 pm to Chuckd
Put it in a chicken yard they will clean the Hell out of one
Posted on 1/29/17 at 5:26 pm to SeaPickle
Correct. I also take a knife to it first get as much of the hide and meat off as I can without spending too much time on it. But I don't boil it, I hate the smell of it.
Popular
Back to top
