- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Does a trigger job effect the value of a pistol?
Posted on 10/22/14 at 8:27 am to Gaston
Posted on 10/22/14 at 8:27 am to Gaston
quote:
I want to make it a V4 though.
From what I'm reading that is just taking off the safety. Is that correct? The charts are different and there is no V4 for P2000 on the chart
Eta: I see the V differences.
V0: CDA (Combat Defense Action) trigger system (SA/DA). Single-action trigger pull of 20 N (4.5 lbf) (+4/-2 N), double-action trigger pull – 51 N (11.5 lbf) (±5 N).
V1: CDA trigger system (LEM). The LEM trigger is a dual-stage trigger that fires from a hammer down position in both SA and DA modes, but has an internal mechanism that is cocked with each cycle of the action. It provides a constant trigger pull of 20 N (4.5 lbf) (+4/-2 N).
V2: CDA trigger system (LEM). Like P2000 V1 but with an increased trigger weight. The trigger pull is 32.5 N (7.3 lbf) (±2.5 N).
V3: SA/DA trigger with a decocking lever mounted at the posterior of the slide to the left of the spurred hammer. Single-action trigger pull of 20 N (4.5 lbf) (+4/-2 N), double-action trigger pull – 51 N (11.5 lbf) (±5 N).
V4: CDA trigger system (LEM). Like P2000 V1 and V2 but with a mid-range trigger pull of 27.5 N (6.2 lbf) (±2.5 N).
V5: Double-action only (DAO) trigger system. Trigger pull of 36 N (8.1 lbf) (±3 N).
This post was edited on 10/22/14 at 8:34 am
Posted on 10/22/14 at 8:34 am to Hu_Flung_Pu
Mine has no safety at all, outside of internal design.
The variations are:
HK sells the light firing pin block spring and light trigger return spring, and they sell two different light hammer springs now. So there's more options than quoted, I think that was a 12# hammer spring, they sell a 10# now as well. I'd have Gray's decide on the optimal setup if I go the action rework route.
All of the options and shipping only comes to $40, so I may just get all of the springs and mess with it.
The variations are:
quote:
Heaviest LEM: (V2), with the heavy TRS + heavy FPBS + heavy hammer spring = 7.3-8 lbs
Medium LEM: (V4), with heavy TRS + light FPBS + heavy hammer spring = ~6-6.5 lbs
Light LEM: (V1), with light TRS and FPBS. Heavy hammer spring = ~4.5-5 lbs
Lightest LEM: (not official variant), light TRS + light FPBS + light hammer spring = ~3.5-4 lbs
HK sells the light firing pin block spring and light trigger return spring, and they sell two different light hammer springs now. So there's more options than quoted, I think that was a 12# hammer spring, they sell a 10# now as well. I'd have Gray's decide on the optimal setup if I go the action rework route.
All of the options and shipping only comes to $40, so I may just get all of the springs and mess with it.
Popular
Back to top
Follow TigerDroppings for LSU Football News