- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
RainX for a saltwater boat windscreen
Posted on 7/25/14 at 8:36 pm
Posted on 7/25/14 at 8:36 pm
Will regular old rainx work or will the salt water still leave deposits?
Thanks.
Bone
Thanks.
Bone
Posted on 7/25/14 at 8:53 pm to Tbonepatron
I'd be nervous about putting that stuff on plexiglass, unless of course your windshield is glass.
Posted on 7/25/14 at 8:56 pm to Tbonepatron
West Marine has something for them, but I don't remember the name of it.
Posted on 7/25/14 at 9:56 pm to Tbonepatron
You could just use regular wax
Posted on 7/25/14 at 10:06 pm to Tbonepatron
use plain car wax or armorall
Posted on 7/25/14 at 11:15 pm to QuietTiger
quote:
I'd be nervous about putting that stuff on plexiglass, unless of course your windshield is glass.
Why would you be nervous? It's a virtually invisible water-repelling layer.
So why does water stick to clear things like glass or plexiglass?
1. Dirt and grime
2. Water spots
What causes these things? Well for the materials to stick to your windshield, they must first dissolve in water. Then this water dries on the surface and leaves behind all the materials that were dissolved in it. Salt water has a lot of different materials dissolved in it besides salt. So having that dry on the surface will leave plenty of material for water to stick to. This is why people who rely on their wiper blades for visibility are wasting their money on buying new blades every few months. Your windshield should repel water like waxed paint.
As you can see, even with bug guts on my windshield, I still have plenty visibility here:
Now for the OP, if you were to properly apply Rain-x or even some type of wax, you need to first remove the layer of gunk on the plexiglass. Use a dual-action polisher or polish by hand. Get a highly abrasive polish, like Meguiar's M105. It can be found at Autozone.
After wiping the haze off the plexiglass surface, it is now bare and ready to receive a coating of Rain-x or wax. You will now have true protection rather than just sticking Rain-x or wax on top of a dirty, water-attracting surface. The water should now bead with ease.
As many of you can see, I am a huge fan of the stuff. Rain-x is truly awesome and should be applied from the factory on every new car.
EDIT: To answer the OPs question, the water still has the potential to leave spots on your plexiglass. The easiest way to prevent this is to wipe the water off before it dries. This prevents it from leaving deposits. But having a properly treated plexiglass surface, the water will bead much easier and has the potential to roll off without drying.
This post was edited on 7/25/14 at 11:17 pm
Posted on 7/25/14 at 11:57 pm to Tbonepatron
Little secret. If your bathroom mirror fogs up when you shower, hit it with rain x and it won't.
Posted on 7/26/14 at 12:10 am to CP3
You can actually spray PAM on it and it'll stop the water from beading up
Posted on 7/26/14 at 7:46 am to bapple
quote:
This is why people who rely on their wiper blades for visibility are wasting their money on buying new blades every few months.
more like every year or 2
Posted on 7/26/14 at 10:25 am to Tbonepatron
Posted on 7/26/14 at 10:41 am to NewIberiaHaircut
quote:
Jetseal works great.
Pretty much anything Chemical Guys makes is a great product. JetSeal is no exception.
Popular
Back to top
Follow TigerDroppings for LSU Football News