I've been building and upgrading PCs since 1986. I have never encountered a problem like I have with my new build.

Gigabyte Auros X570 mini-ITX MB
Ryzen 5600X CPU
G Skills Ripjaws 2 X 8 compatible RAM (it's on their list)
Zotac 3070

The PC powers up but I get nothing on the display. I've swapped the new 3070 into my 9900K build and it displays just fine. In fact, the image on my monitor is stunning with it installed.

I've done the Q-Flash to update BIOS and still no image on the monitor. It is connected via displayport.

All fans spin up but no post no display.

2 ...

Report Post

Posted by Joshjrn

Baton Rouge

Member since Dec 2008

27161 posts

Posted on 8/13/21 at 9:44 pm to VABuckeye

That’s a lot of troubleshooting possibility.

Is your gpu docked directly in or using a riser cable? When you tested it with the other system, did you use the same DP cable, or a different one?

2 ...

Report Post

Posted by finchmeister08

Member since Mar 2011

35800 posts

Posted on 8/13/21 at 10:35 pm to VABuckeye

My 6700xt is doing the same thing but I can’t get a display on any computer. It was on a riser mining. The system crashed and never came back on so I got to plugging and unplugging components while troubleshooting and long story short, I might’ve plugged in a riser backwards onto to the motherboard while troubleshooting. It’s weird though because I never got a reaction from doing so. Burning smell, smoke, capacitor pops, etc.

Contacted AMD and they suggested resetting the CMOS on the mobo. Didn’t work and I’m not exactly sure why it would’ve. Hopefully I can get it replaced because I’ve only had it for 3 weeks.

Lights and fans come on but nothing else.

This post was edited on 8/13/21 at 10:38 pm

2 ...

Report Post

Gaming Board - Replies to Post

Return To Board

Page 1

Return To Board